Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interfaces
- Displays HCCN help information
- Sets the IP address and subnet mask of an RoCE NIC
- Sets the default gateway of an RoCE NIC
- Obtains the default gateway of an RoCE NIC
- Sets the IP address of the network detection object
- Obtains the MAC address of an RoCE NIC
- Queries LLDP information
- Restores the NIC configuration
- Shuts down a link
- Obtains the status of a link
- Obtains the ETH port speed
- Obtains the duplex mode
- Sets the MTU of an RoCE NIC
- Obtains the MTU of an RoCE NIC
- Obtains the network health status
- Sets the MAC address of an RoCE NIC
- Sets the DSCP to TC mapping
- Obtains the DSCP to TC mapping
- Obtains the ARP table
- Obtains the routing table
- Adds an entry to the routing table
- Deletes a device from the routing table
- Clears the routing table
- Obtains PCI device information
- Obtains QPC Information
- Obtains AEQC information
- Obtains CEQC information
- Obtains CQC information
- Obtains MPT information
- Obtaining Optical Module Information
- Obtains register information
- Obtains the IP address and subnet mask
- Obtains statistics
- Sets the bandwidth limit of an RoCE NIC
- Obtains the bandwidth limit of an RoCE NIC
- Restores the configuration of all RoCE NICs
- Obtains network version
- Sets TLS
- Tests RoCE bandwidth latency
