UPS5000-E-120K-FM, PM30K-V4S, and UPSBypModu00-01 V100R003 Regulatory Compliance Statement

UPS5000-E-120K-FM&PM30K-
V4S&UPSBypModu00-01
V100R003
Regulatory Compliance Statement

Issue 01

Date 2020-09-15




HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.


Trademarks and Permissions


and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.


Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties,
guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.




Huawei Technologies Co., Ltd.
Address: Huawei Technologies Co., Ltd.
Bantian, Longgang District,
Shenzhen, 518129,
People's Republic of China

Website: http://e.huawei.com




Huawei Proprietary and Confidential
Issue 01 (2020-09-15) i
Copyright © Huawei Technologies Co., Ltd.
UPS5000-E-120K-FM&PM30K-V4S&UPSBypModu00-01
Regulatory Compliance Statement 1 Regulatory Compliance Information




Regulatory Compliance Information

About This Chapter


1.1 European Regulatory Compliance
1.2 China Regulatory Compliance
1.3 Other Markets




1.1 European Regulatory Compliance
Uninterruptible power system Product(model: UPS5000-E-120K-FM) complies with
the following European directives and regulations.
 2014/30/EU (EMC)
 2014/35/EU (low voltage)
 2011/65/EU & (EU) 2015/863 (RoHS)
 (EC) NO. 1907/2006 (REACH)
 2012/19/EU (WEEE)
 94/62/EC (Packaging)
 2006/66/EC &2013/56/EU (Batteries and accumulators)


Power module (model: PM30K-V4S) and Bypass module (model: UPSBypModu00-01)
complies with the following European directives and regulations.
 2014/30/EU (EMC)
 2014/35/EU (low voltage)
 2011/65/EU & (EU) 2015/863 (RoHS)
 (EC) NO. 1907/2006 (REACH)
 2012/19/EU (WEEE)
 94/62/EC (Packaging)



Huawei Proprietary and Confidential
Issue 01 (2020-09-15) 1
Copyright © Huawei Technologies Co., Ltd.
UPS5000-E-120K-FM&PM30K-V4S&UPSBypModu00-01
Regulatory Compliance Statement 1 Regulatory Compliance Information




CE Marking:
The following CE mark identifier and affixed to the equipment and packaging:




1.1.1 EMC
WARNING:
This is a product for commercial and industrial application in the second environment –
installation restrictions or additional measures may be needed to prevent disturbances.




Electrostatic discharge:

CAUTION
ESD Protection
Always wear ESD gloves or an ESD wrist strap prior to contact with the equipment or before handling
devices, boards, or IC chips
to prevent damage to sensitive components due to electrostatic discharge from the human body. Ensure
that the ESD wrist strap is properly grounded.


For information about how to wear an ESD wrist strap, see Figure below.




Wearing an ESD wrist strap




Huawei Proprietary and Confidential
Issue 01 (2020-09-15) 2
Copyright © Huawei Technologies Co., Ltd.
UPS5000-E-120K-FM&PM30K-V4S&UPSBypModu00-01
Regulatory Compliance Statement 1 Regulatory Compliance Information




Cables and shielding.

EMC performance is dependent upon the use of correct cables of good quality for all
external connections when installing this equipment, ensure compliance with
cable/connector specifications and associated installation instructions where given elsewhere
in the product manual.

Where shielded cables are required and no specific requirement in the product manual then
the following good practices shall be implemented:
 Multi-conductor cables should be of double-braided shielded type and have
conductive connector bodies and backshells with cable clamps that are
conductively bonded to the backshell and capable of making 360 degree
connection to the cable shielding.
 Ethernet cables should be of the double-shielded type.
 Coaxial cables should be of the double-braided shielded type.
 The shielded cables should be grounded at both end.




1.1.2 WEEE
Uninterruptible power system (model:UPS5000-E-120K-FM), Power module
(model: PM30K-V4S) and Bypass module (model: UPSBypModu00-01) complies with
Directive 2012/19/EU on waste electrical and electronic equipment (WEEE).
Huawei is responsible for recycling its end-of-life devices, and please contact
Huawei local service center when recycling is required. Huawei strictly complies
with the EU Waste Electrical and Electronic Equipment Directive (WEEE Directive)
and electronic waste management regulations enacted by different countries
worldwide. In addition, Huawei has established a system for recycling and reuse of
electronic wastes, and it can provide service of dismantling and recycling for
WEEE. By Huawei recycling system, the waste can be handled environmentally and
the resource can be recycled and reused fully, which is also Huawei WEEE
stratagem in the word. Most of the materials in product are recyclable, and our
packaging is designed to be recycled and should be handled in accordance with
your local recycling policies.


Huawei Proprietary and Confidential
Issue 01 (2020-09-15) 3
Copyright © Huawei Technologies Co., Ltd.
UPS5000-E-120K-FM&PM30K-V4S&UPSBypModu00-01
Regulatory Compliance Statement 1 Regulatory Compliance Information

In accordance with Article 11(2) in Directive 2012/19/EU (WEEE), products were
marked with the following symbol: a cross-out wheeled waste bin with a bar
beneath as below:




1.2 China Regulatory Compliance
1.2.1 China RoHS hazardous substance table
不间断电源产品(型号：UPS5000-E-120K-FM)满足中国 RoHS 的要求：

产品中有害物质的名称及含量
部件名称
镉 铅 汞 六价铬 多溴联苯 多溴二苯醚

机柜 〇 ╳ 〇 〇 〇 〇

PCBA 〇 ╳ 〇 〇 〇 〇

线缆 〇 ╳ 〇 〇 〇 〇

辅料 〇 ╳ 〇 〇 〇 〇

配套设备 〇 ╳ 〇 〇 〇 〇

电池 〇 ╳ 〇 〇 〇 〇

本表格依据 SJ/T 11364 的规定编制。
○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
╳：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。




Huawei Proprietary and Confidential
Issue 01 (2020-09-15) 4
Copyright © Huawei Technologies Co., Ltd.
UPS5000-E-120K-FM&PM30K-V4S&UPSBypModu00-01
Regulatory Compliance Statement 1 Regulatory Compliance Information

功率模块(型号 PM30K-V4S)满足中国 RoHS 的要求：

产品中有害物质的名称及含量
部件名称
镉 铅 汞 六价铬 多溴联苯 多溴二苯醚

外壳 〇 ╳ 〇 〇 〇 〇

PCBA 〇 ╳ 〇 〇 〇 〇

线缆 〇 ╳ 〇 〇 〇 〇

辅料 〇 ╳ 〇 〇 〇 〇

配套设备 〇 ╳ 〇 〇 〇 〇

本表格依据 SJ/T 11364 的规定编制。
○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
╳：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。



旁路模块(型号 UPSBypModu00-01)满足中国 RoHS 的要求：

产品中有害物质的名称及含量
部件名称
镉 铅 汞 六价铬 多溴联苯 多溴二苯醚

外壳 〇 ╳ 〇 〇 〇 〇

PCBA 〇 ╳ 〇 〇 〇 〇

线缆 〇 ╳ 〇 〇 〇 〇

辅料 〇 ╳ 〇 〇 〇 〇

配套设备 〇 ╳ 〇 〇 〇 〇

本表格依据 SJ/T 11364 的规定编制。
○：表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
╳：表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。




1.3 Other Markets
For relevant compliance information/documentation for markets not mentioned
above, please contact Huawei representative



Huawei Proprietary and Confidential
Issue 01 (2020-09-15) 5
Copyright © Huawei Technologies Co., Ltd.