Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Tabletop Fixture
Background
The tabletop fixture consists of three boards. Among them, one is to be installed horizontally, and the other two on the left and right respectively.
When installing the tabletop fixture, ensure that its grooved surface faces up, as shown in Figure 8-1.
Procedure
- Install the left and right fixture boards.
Connect the grooves of the two fixture boards to the middle two feet of the conference table in the first row respectively, as shown in Figure 8-2.
- Install the horizontal fixture board.
Insert the two grooves of the horizontal fixture board into the other ends of the left and right fixture boards, as shown in Figure 8-3.
