Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Rear Decorative Covers
Prerequisites
All telepresence devices are installed and commissioned with complete cables.
Background
Six rear decorative covers need to be installed for the multi-functional conference table in the second row.
Procedure
- Install the rear decorative covers.
Push in the four rear decorative covers along the sliding slots on the back of the tabletop, as shown in Figure 11-1.
- Fix the rear decorative covers.Use a Phillips screwdriver to tighten two M6 x 16 flat head screws to secure the six rear decorative covers. Here, the first rear decorative cover on the left is used as an example, as shown in Figure 11-2.
