Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mounting the Video Distributor
Prerequisites
Before mounting the video distributor, make sure that it works properly.
Figure 6-17 Video distributor
![]( "Click to enlarge")
Procedure
- Mount the video distributor fixing support on the center rack, and use two M5 x 10 cross recessed pan head thread forming screws to secure the support, as shown in Figure 6-18.
- Orient the rear ports of the video distributor to the multi-functional conference table.
- Place the video distributor in the fixing support, as shown in Figure 6-19. No other fastening operations are required.
