Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mounting the Frame Cover Panels (For 65-Inch Telepresence Systems Only)
Background
The frame cover panel needs to be mounted to the joint of two 65-inch displays.
A total of two frame cover panels are required for the 65-inch telepresence system. They have the same appearance and can be installed in the same way. Here, one frame cover panel is used as an example.
Procedure
- Mount the frame cover panel (C-17) to the upper joint of two displays, as shown in Figure 14-1.
- Mount the lower end cover (C-18) of the frame cover panel to the lower joint of adjacent displays, as shown in Figure 14-2.
Lock the lower end cover through the two location holes, as shown in Figure 14-3.
- Use your hand to tighten the screws clockwise, as shown in Figure 14-4.
- Install the other frame cover panel using the same method, Figure 14-5 shows the two frame cover panels after installation.
After all displays are installed, move the displays to align their sides with the frame cover panels.
