Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Covers for the Cable Troughs on the Ground
Install the covers for the cable troughs on the ground. The left and right cable trough covers are installed in the same way. Here, the left cable trough cover is used as an example.
Before installing the cable trough covers, ensure that the tabletop display network cables, video and audio cables, and power cables have been routed and bundled in the table legs.
- Installing the Covers for the Cable Troughs on the Ground Fasten the cover plate of the cable trough to the cable trough, as shown in Figure 11-9.
- Fix the ends of the cable troughs with their covers as shown in Figure 11-10.
- Use a Phillips screwdriver to tighten the ten M6 x 12 countersunk screws to secure the table leg cover, as shown in Figure 11-10.
