Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the 7-Outlet PDUs
Background
One 7-outlet PDU needs to be installed in the center rack and right rack each. They are installed in the same way. The following procedure uses one of them as an example.
Procedure
- Orient the 7-outlet PDU ports upward and place the PDU on the right rack. Tighten one M6 x 16 hex socket screw at each end, as shown in Figure 6-12.
- Install a 7-outlet PDU in the center rack in the same way. Figure 6-13 shows the installation position.