Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Telepresence Host
Prerequisites
The telepresence host can be powered on, and you can log in to its web interface to set its parameters.
Figure 6-14 shows the telepresence host.
Procedure
- Orient the rear ports of the telepresence host to the multi-functional conference table with the power switch on the right side.
- Place the telepresence host inside the center rack, as shown in Figure 6-15.
- Place the telepresence host adapter inside the center rack, as shown in Figure 6-16 . Just put it there. You do not need to perform any other operations.
