Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Routing Camera Cables
Background
Route the camera cables before you mount the displays onto the racks. If you mount the displays first, they will block the racks, leading to impossible camera cable routing.
Camera cables include: the power cable, the network cable, and the three-in-one HD video cable.
Procedure
- Tie the cable ties near the camera ports, which are 30 cm from the cable connectors, as shown in Figure 5-1.
Route the cables from the rear side of the racks (near the rear panel). This is to ensure that speaker supports can be installed at the cable ties spots later.
- Route and bundle the cables along the center rack.
Camera power cable
Three-in-one HD video cable
Network cable
Dotted line: indicates the cable part blocked by devices or components.
