Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Relay
Procedure
- Attach mounting ears and retention assemblies onto the ends of the rear panel, as shown in Figure 6-21.
- Orient the relay ports to the multi-functional conference table, and place the relay inside the center rack, as shown in Figure 6-23.
- Tighten one M6 x 16 hex socket screw at each end, as shown in Figure 6-22.
- Stack two relays in the center rack, as shown in Figure 6-23.
