Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Table Leg Connecting Rods
- Push the six connecting rods into the table legs from the back of the table, as shown in Figure 11-11.
- Tighten six M6 x 16 socket head cap screws to secure each connecting rod, as shown in Figure 11-12.
