Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Table Leg Covers for the Multi-Functional Conference Table in the First Row
The left and right table leg covers are installed in the same way. Here, the left one is used as an example.
Before installing the table leg covers, ensure that the tabletop display network cables, video and audio cables, and power cables have been routed and bundled in the table legs.
- Insert the left table leg cover into the left table leg (D-03) of the multi-functional conference table in the first row, as shown by
in Figure 11-6.
- Use a Phillips screwdriver to tighten six M6 x 16 flat head screws to secure the left table leg cover, as shown by
in Figure 11-6.
- Install the right table leg cover in the same way.
in 
in 
