Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mounting the Audio Processor
Background
One audio processor is required for a single row, and two audio processors are required for two rows.
Figure 6-29 shows an audio processor.
Procedure
- Use three M6 x 16 hex socket screws to secure the support (A-06) in the rack, as shown in Figure 6-30.
- Put the audio processor in the right rack, with its port panel facing the center rack and the power plug facing downward, as shown in Figure 6-31. No other fastening operations are required.
