Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dcmi_get_device_ndie Prototype
Syntax
int dcmi_get_device_ndie (int card_id, int device_id, struct dsmi_soc_die_stru * pdevice_ndie)
Function
Queries the NDIE ID of a specified chip.
Parameter Description
Parameter |
Input/Output |
Type |
Description |
|---|---|---|---|
card_id |
Input |
int |
ID of the Atlas 300T training card (model 9000). Query the supported IDs by referring todcmi_get_card_num_list Prototype. |
device_id |
Input |
int |
Chip ID. The value is 0 (there is only one chip). Query the actually supported range by referring to dcmi_get_device_num_in_card Prototype. |
pdevice_ndie |
Output |
struct dsmi_soc_die_stru * |
Returned NDIE information. The information structure is as follows: unsigned int *pdevice_die struct dsmi_soc_die_stru{ unsigned int soc_die[5]; } |
Return Value
Type |
Description |
|---|---|
int |
Results:
|
Exception Handling
N/A
Constraints
N/A
Calling Example
...
int ret = 0;
int card_id = 0x3 ;
int device_id = 0;
struct dsmi_soc_die_stru device_ndie = {0};
ret = dcmi_get_device_ndie(card_id, device_id, &device_ndie);
if(ret != 0) {
//todo: records logs
return ret;
}
...
