Checking the Environment
Before the installation, check the following environment information:
- Check whether the Atlas 300T training card (model 9000) is properly installed.
You can use either of the following methods to check whether the Atlas 300T training card (model 9000) is properly installed:
- Run the lspci | grep d801 command. The following information is displayed:
3b:00.0 Processing accelerators: Device 19e5:d801 (rev 20) 86:00.0 Processing accelerators: Device 19e5:d801 (rev 20)
- If the server on which the Atlas 300T training card (model 9000) is installed is a Huawei server, log in to the iBMC WebUI, and choose Information > System Info > Other Devices. If the information about the Atlas 300T training card (model 9000) is displayed under PCIe Card, the Atlas 300T training card (model 9000) is properly installed.Figure 1-1 System Info
- Run the lspci | grep d801 command. The following information is displayed: