Obtaining Software Packages
Before the installation, obtain the software packages based on the OS of the operating environment. Table 1-2 describes the software environment.
Component |
OS |
Package Name |
User |
|---|---|---|---|
Firmware package |
Ubuntu 18.04/CentOS 7.6/Debian 9.9/CentOS 8.2/Kylin V10 SP1/EulerOS 2.8 NOTE:
Kylin V10 SP1 is supported only by 21.0.rc1 or later. |
A300t-9000-npu-firmware_<version>.run |
root |
Driver package |
Debian 9.9+x86_64 |
A300t-9000-npu-driver_x.x.x_debian9.9-x86_64.run |
root |
Driver package |
CentOS 7.6+x86_64 NOTE:
If the CentOS x86 kernel of a version earlier than 4.5 cannot be used when PCIe cards are configured, upgrade the kernel to 8.0 or later or build a kernel patch. For details about how to build a kernel patch, see Building a Kernel Patch. |
A300t-9000-npu-driver_x.x.x_centos7.6-x86_64.run |
root |
Driver package |
CentOS 7.6+aarch64 |
A300t-9000-npu-driver_x.x.x_centos7.6-aarch64.run |
root |
Driver package |
Ubuntu 18.04+x86_64 |
A300t-9000-npu-driver_x.x.x_ubuntu18.04-x86_64.run |
root |
Driver package |
Ubuntu 18.04+AArch64 |
A300t-9000-npu-driver_x.x.x_ubuntu18.04-aarch64.run |
root |
Driver package |
CentOS 8.2+x86_64 |
A300t-9000-npu-driver_x.x.x_linux-x86_64.run |
root |
Driver package |
CentOS 8.2+AArch64 |
A300t-9000-npu-driver_x.x.x_linux-aarch64.run |
root |
Driver package |
EulerOS 2.8+AArch64 |
A300t-9000-npu-driver_x.x.x_euleros2.8-aarch64.run |
root |
Driver package |
Kylin V10 SP1+AArch64 NOTE:
Kylin V10 SP1 is supported only by 21.0.rc1 or later. |
A300t-9000-npu-driver_x.x.x_linux-aarch64.run |
root |
- {x.x.x} indicates the version number.
- A300t-9000-npu-driver_x.x.x_linux-x86_64.run can be used in all x86 OSs. A300t-9000-npu-driver_x.x.x_linux-aarch64.run can be used in all ARM OSs.
Procedure
- Visit the A300T-9000.
- Select the target version A300T-9000 X.X.X.
For details about the mapping between the firmware, driver, and CANN, see CANN Version Mapping.
- Click
and
next to the software package (for example, A300t-9000-npu-firmware_<version>.run) to obtain the software package and digital signature file.
and 
next to the software package (for example, A300t-9000-npu-firmware_<version>.run) to obtain the software package and digital signature file.