Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Information About a Card
Function
The npu-smi info -t board -i id command is used to query the board information about a card.
Syntax
npu-smi info -t board -i id
Parameters
Parameter |
Description |
|---|---|
id |
Device ID. The NPU ID obtained by running the npu-smi info -l command is the device ID. |
Restrictions
The board information of a specific card cannot be queried on a VM.
Example
#Query the board information about device 2.
npu-smi info -t board -i 2
NPU ID : 2
Product Name :
Model :
Manufacturer :
Serial Number :
Software Version : 1.73.T105.0.B050
Firmware Version : 1.73.105.0.b050
Board ID : 0xdf
PCB ID : A
BOM ID : 0
PCIe Bus Info : 0000:01:00.0
Slot ID : 2
Class ID : NA
PCI Vendor ID : 0x19E5
PCI Device ID : 0xD801
Subsystem Vendor ID : 0x0200
Subsystem Device ID : 0x0100
Chip Count : 1
Chip Fault : 0