Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Information About a Chip on a Card
Function
The npu-smi info -t board -i id -c chip_id command is used to query the board information of a chip on a PCIe card.
Syntax
npu-smi info -t board -i id -c chip_id
Parameters
Parameter |
Description |
|---|---|
id |
Device ID. The NPU ID obtained by running the npu-smi info -l command is the device ID. |
chip_id |
Chip ID.
|
Restrictions
None
Example
#Query the board information of chip 0 on device 2.
npu-smi info -t board -i 2 -c 0
NPU ID : 2
Chip ID : 0
Chip Type : Ascend
Chip Name : 910A
Chip Version : V1
Board ID : 0x01
PCB ID : A
BOM ID : 1
VDie ID : 109421D4 01C02724 6A030A53 6DA7040A 00102001
NDie ID : 05821994 20E0E60C 6A030A53 6DA7040A 86102001
Chip Position ID : 0
PCIe Bus Info : 0000:01:00.0
Firmware Version : 1.73.105.0.b050