Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Common Information About All Chips
Function
The npu-smi info -t common -i id command is used to query the common information of all chips.
Syntax
npu-smi info -t common -i id
Parameters
Parameter |
Description |
|---|---|
id |
Device ID. The NPU ID obtained by running the npu-smi info -l command is the device ID. |
Restrictions
When you query the Aicore Usage Rate usage, if profiling is enabled, an error will be reported.
Example
#Query the common information about all chips on device 2.
npu-smi info -t common -i 2
NPU ID : 2
Chip Count : 1
Chip ID : 0
Memory Usage Rate(%) : 9
HBM Usage Rate(%) : 0
Aicore Usage Rate(%) : 0
Aicore Freq(MHZ) : 1000
Aicore curFreq(MHZ) : 1000 Aicore Count : 32
Temperature(C) : 52
NPU Real-time Power(W) : 64.9
Chip Name : mcu
Temperature(C) : 48