Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Voltage of a Chip
Function
The npu-smi info -t volt -i id -c chip_id command is used to query the voltage of a chip.
Syntax
npu-smi info -t volt -i id -c chip_id
Parameters
Parameter |
Description |
|---|---|
id |
Device ID. The NPU ID obtained by running the npu-smi info -l command is the device ID. |
chip_id |
Chip ID.
|
Restrictions
None
Example
#Query the voltage of chip 0 on device 2.
npu-smi info -t volt -i 2 -c 0
Voltage(V) : 12.20