Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Statistics of All Chips on a Card
Function
npu-smi info -t memory -i id command is used to query the memory information of all chips.
Syntax
npu-smi info -t memory -i id
Parameters
Parameter |
Description |
|---|---|
id |
Device ID. The NPU ID obtained by running the npu-smi info -l command is the device ID. |
Restrictions
None
Example
#Query the memory information of all chips on device 2.
npu-smi info -t memory -i 2
NPU ID : 2
Chip Count : 1
Chip ID : 0
DDR Capacity(MB) : 15600
DDR Clock Speed(MHz) : 1200
HBM Capacity(MB) : 32255
HBM Clock Speed(MHz) : 1200
HBM Tmperature(C) : 54