Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction
The adc command is provided to implement functions such as file transfer, log level setting, and heartbeat detection through the communication between the Ascend Debug Client (ADC) and Ascend Debug Agent (ADA).
The adc command is run on the server where Toolkit is installed and is then delivered to the operating environment for execution.
Figure 10-1 ADX logical architecture
![]()
Acronyms and abbreviations:
- ADC: Ascend Debug Client. The corresponding command name is adc.
- ADA: Ascend Debug Agent. The corresponding process name is ada.
- ADX: Ascend Debug for X, a module name.
Pay attention to the following:
- In the Ascend EP scenario, ADA is deployed on the host, which is also the operating environment.
- In the Ascend RC scenario, ADA is deployed on the developer board, which is also the operating environment. In addition, you can run the adc command in the operating environment without installing Toolkit.
