Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Profiling Fails with Prompt "Unable to get ai_core_pmu_events data."
Symptom
A prompt "Unable to get ai_core_pmu_events data." is reported when the Profiling command is executed, as shown in Figure 7-45.
In addition, check the error in "~/.mindstudio/profiler/log/collection.log", as shown in Figure 7-46.
Possible Cause
According to the log message, the possible cause is as follows:
The Toolkit and Driver versions installed in the development environment do not match those installed in the operating environment.
Solution
Perform the following operation:
Use the matched Toolkit and Driver both in the development environment and operating environment. Then run the profiling command again.
