Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Overview
- If multiple servers need to be configured, you can use SmartKit to configure them in batches. This document describes the configuration method in this scenario.
- In the scenario where a single server or a small number of servers are configured, you can use SmartKit for batch or single configuration. For details about how to use SmartKit, see this document. For details about how to configure a single server, see "Initial Configuration" in the server user guide.
- Before using this document, ensure that the server hardware has been installed, cables have been connected, and the server has been powered on.
- Before using this document, ensure that the network ports of the server have been planned and the network has been connected. For details about the network port planning for the Atlas 500 Pro AI edge server (model 3000), see Atlas 500 Pro AI Edge Server (Model 3000) Network Planning.
Figure 1-1 shows the process for configuring servers using SmartKit.
