Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Atlas 500 AI Edge Station Firmware Version
The AtlasEdge and HA software is contained in the firmware of the Atlas 500 AI edge station. Before configuration, check the firmware version of the Atlas 500 AI edge station first. The procedure is as follows:
- Log in to the intelligent edge system (IES) WebUI of an Atlas 500 AI edge station. For details, see Logging In to the Atlas 500 AI Edge Station WebUI.
- Choose , and check the current version of the Atlas 500 AI edge station.
The current version must be 20.0.x.x or later. Otherwise, upgrade the version to 20.0.x.x or later by referring to "Updating the Firmware of the Atlas 500 AI Edge Station" in the Atlas 500 AI Edge Station Upgrade Guide (Models 3000, 3010).
