About This Document
Overview
This document describes how to install drivers, configure the system, and upgrade the system when the Atlas 200 AI accelerator module is used as the main processor or coprocessor.
Intended Audience
This document is intended for:
- Huawei technical support engineers
- Technical support engineers from channel partners
- Enterprise administrators
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Command Conventions
Format |
Description |
---|---|
Boldface |
The keywords of a command are in Boldface. |
Italic |
Command arguments (replaced by specific values in an actual command) are in italics. |
[ ] |
Items in square brackets ([ ]) are optional. |
{ x | y | ... } |
Optional items are grouped in braces ({}) and separated by vertical bars. One item is selected. |
[ x | y | ... ] |
Optional items are grouped in brackets and separated by vertical bars. One item or no item is selected. |
{ x | y | ... }* |
Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected. |
[ x | y | ... ]* |
Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected. |
&<1-n> |
This parameter before the & sign can be repeated 1 to n times. |
# |
A line starting with the # sign is comments. |
Change History
Issue |
Date |
Description |
---|---|---|
06 |
2022-04-07 |
This issue is the sixth official release. Modified System Driver and Firmware. |
05 |
2022-02-18 |
This issue is the fifth official release. Optimized the default data. |
04 |
2021-04-25 |
This issue is the fourth official release.
|
03 |
2021-01-25 |
This issue is the third official release.
|
02 |
2020-12-24 |
This issue is the second official release. Updated Deploying Containerized Applications. |
01 |
2020-10-26 |
This issue is the first official release. |