Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Power Supply and Distribution Devices
Installing Lithium Batteries
Procedure
- Push a lithium battery into the cabinet and secure it.Figure 4-13 Installing a lithium battery
- The lithium battery weighs about 43 kg. Check the load-bearing capability of the rack tray before installation.
- The lithium battery is 396 mm deep. Check the depth of the rack before installation.
- The lithium battery can be installed in a 19-inch rack with guide rails and a tray. Check whether the load-bearing capability meets requirements.
- If multiple lithium batteries are installed, certain clearances should be reserved. The space for each lithium battery should be at least 3 U. The lithium batteries cannot be directly stacked or vertically placed.
- Install lithium batteries from bottom to top.
- Install the protective covers for the positive and negative poles of the lithium batteries.
- Install other lithium batteries in the same way.
