Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cabinet Transportation and Unpacking
Context
- Only trained personnel are allowed to move the cabinet. Remove the packed cabinet from the pallet using a pallet truck and move the cabinet to the installation position.
- To prevent the cabinet from falling over, secure it to the pallet truck using ropes before moving it.
- To prevent shocks or falls, move the cabinet gently. After placing the cabinet in the installation position, unpack it and take care to prevent scratches. Keep the cabinet steady during unpacking.
- If the cabinet installation environment is in poor condition, to well store the cabinet after it is unpacked, take measures to prevent dust. You can wrap the cabinet with the original plastic coat.
Do not tear down the transparent film from the glass door during the installation. The film will be removed after the entire module is installed.
Procedure
- Use a pallet truck to transport the cabinet to the installation position.
- Check that the cabinet package is intact.
- Cut off and remove the binding straps, and remove the packing.
- Remove pallets from ordinary cabinets.
- After checking that the cabinet is intact, remove the screw assemblies that secure the cabinet to the pallet, as shown in Figure 4-3.
Set the screw assemblies aside for they will be used in installation steps.
- Remove the cabinet from the pallet and move the cabinet to the installation position.
To avoid personal injury, prevent the cabinet from falling over during transportation.
- After checking that the cabinet is intact, remove the screw assemblies that secure the cabinet to the pallet, as shown in Figure 4-3.
