Preparations and WebUI Login

Procedure

1. Connect a network cable between the PC network port and the WAN1 port (protected by a security mechanism) on the ECC800-Pro.
   Table 5-3 Default IP addresses for the WAN and LAN ports on the ECC800-Pro

   Port	Default IP Address
   WAN1	192.168.8.10
   WAN2	192.168.0.10 192.168.248.10 (FusionModule800)
   LAN1 and LAN2	192.168.248.10

   • In ECC800 V100R002C10 and earlier versions, the default IP address of port WAN_1 is 192.168.1.10.
   • The WAN1 port IP address cannot be set to an IP address in any of the following network segments: 192.168.0.x, 192.168.245.x, 192.168.246.x and 192.168.248.x.
   • IP addresses for the WAN1 and WAN2 ports should not be set in the same network segment.
   • In some customized scenarios, the default IP address for the WAN2 port is 192.168.248.10. The default value may vary.
   • WAN ports support the Internet access and LAN ports support the intranet access. Connect the PC network port to the WAN1 port or LAN port on the ECC800-Pro based on the access network.

2. Configure the PC IP address and the WAN1 IP address in the same network segment.

   If the WAN1 port IP address is 192.168.8.10, subnet mask is 255.255.255.0, and default gateway is 192.168.8.1, set the PC IP address to 192.168.8.12, subnet mask to 255.255.255.0, and default gateway to 192.168.8.1.

3. Set LAN parameters.
   • If the ECC800-Pro connects to a LAN and a proxy server has been selected, perform 3.c and 3.d.
   • If the ECC800-Pro connects to the Internet, and the PC in a LAN accesses the Internet over a proxy server, do not perform 3.c and 3.d. Otherwise, you will fail to access the ECC800-Pro.
   1. Open the Internet Explorer and choose Tools > Internet Options.
   2. Click the Advanced tab and select Use TLS1.1 and Use TLS1.2.
   3. (Optional) Click the Connections tab and select LAN settings.
   4. (Optional) On Proxy server, clear Use a proxy server for your LAN.
   5. Click OK.
4. Set Internet Explorer parameters.
   1. When you use Internet Explorer for access, set Internet Explorer to ensure the normal display of and operations on the WebUI. Choose Tools > Compatibility View, and add the web access address to the compatibility view.
   2. Choose Tools > Internet options > Security, choose Add the ECC800-Pro IP address to the list of trusted sites.
      Figure 5-3 Adding an address
      

   3. Enable file download and set the security level of the trusted site to low.
      Figure 5-4 Setting parameters
      

      When switching between different versions of the ECC800-Pro on your PC, you are advised to clear the historical Internet Explorer cache. Failing to do so may cause some information missed or exception after login. The following provides the details:

      1. Open Internet Explorer and choose Tools > Internet Options > General.
      2. Select Delete browsing history on exit and click Delete.
      3. In the Delete Browsing History dialog box, select all options except Password, and click Delete.

5. Log in to the ECC800-Pro WebUI.
   1. Enter https://monitoring IP address (such as monitoring IP address https://192.168.8.10) in the address box of the browser, and then press Enter to enter the WebUI login page.
      Figure 5-5 WebUI login page
      

   2. On the login page, enter the preset user name admin and preset password Changeme, set the language, and click Log In.

      • After the first login, change the password in time to ensure account security and prevent unauthorized network attacks, such as data tampering. Huawei will not be liable for any security issues caused by your failure to change the preset password in time or password loss after changing.

      • Change the password of the user account periodically.
      • Record and keep the password properly. If you forgot the password, you will be unable to log in to the WebUI.
      • When the event notification is configured and the password retrieval mode is configured under user management, the password can be retrieved.
      • An account is logged out due to timeout if no operation is performed within 10 minutes after system login.
      • A maximum of three users can log in to the ECC800-Pro WebUI at the same time.