O&M Management Architecture
Figure 9-1 shows the O&M management architecture of the Atlas data center solution.
For an Atlas server, connect the BMC management network port to the out-of-band management network and the OS management network port to the in-band management network.
Offline O&M management
O&M personnel install SmartKit on their PCs, which supports offline O&M management, simplifying site deployment delivery and routine O&M, and improving work efficiency. A PC can be connected to the in-band or out-of-band network plane to implement offline O&M management, as shown in Table 9-1.
For details, see the FusionServer Tools 2.0 SmartKit User Guide.
Management Network |
Hardware |
Operation |
|---|---|---|
Out-of-band network plane |
Atlas 800 AI training server |
Deployment delivery
O&M management:
|
Atlas 900 AI cluster |
||
In-band network plane |
Atlas 800 AI training server |
Site deployment delivery:
O&M management:
|
Atlas 900 AI cluster |
Centralized O&M management
O&M personnel can deploy FusionDirector on a general-purpose server to centrally manage hardware devices. The O&M personnel access the FusionDirector WebUI on the PC to manage devices, configure devices, update firmware, monitor devices, and deploy OSs throughout the life cycle.
FusionDirector also provides standard native Redfish APIs to connect to the Huawei eService or a third-party O&M management platform.
For details about the centralized O&M management of FusionDirector, see the FusionDirector x.x Operation Guide.
