No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Routing Loop Generated When Routes Are Imported Between BGP and OSPF Processes

As dynamic routing protocols, BGP and OSPF are widely used on live networks. Mutual route import between BGP and OSPF processes is often involved in networking solutions. If no correct routing policies are configured on the devices where routes are mutually imported between BGP and OSPF processes to control the route advertisement direction, a Layer 3 routing loop may occur, compromising services.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Updated: 2020-11-03

Document ID: EDOC1100166853

Views: 22

Downloads: 6

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next