Appearance
Battery
This topic describes the battery appearance.
(1) LED-indicator |
(2) DC switch |
(3) Power control module |
(4) Battery expansion modules |
(5) Installation base |
() Black start switch |
(7) Heat sink |
Power Control Module
The power of the power control module is 5 kW.
(1) Power control module |
(2) Black start switch |
(3) Battery terminals (BAT+/BAT–) |
(4) COM port (COM) |
(5) Battery cascading terminals (B+/B–) |
(6) DC switch (DC SWITCH) |
(7) COM port (COM) |
(8) Fuse |
(9) Ground point |
(10) Battery terminals (BAT-/BAT+) |
(11) Locking screw hole for the DC switch (M4)a |
Note a: (Optional) Remove the plastic cap and install a locking screw for the DC switch to prevent misoperations.
Battery Expansion Module
The standard capacity of a battery expansion module is 5 kWh.
(1) Battery expansion module |
(2) Boss for alignment |
(3) Battery cascading terminals (B+/B–) |
(4) Battery cascading terminals (B+/B–) |
(5) COM port (COM) |
(6) Ground point |
(7) Heat sink |
(8) Ground point |