Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting a Card
This section provides a sample of resetting a card using the rpc method.
Table 2-15 Resetting a card
Operation |
XPATH |
|---|---|
rpc |
reset-board/slot-index reset-board/reset-reason |
Data Requirements
Table 2-16 Resetting a card
Item |
Data |
Description |
|---|---|---|
Card name |
LPU2 |
- |
Reset reason |
configuration-disaccord-with-controller |
- |
Request Example
<?xml version="1.0" encoding="UTF-8"?>
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="33">
<dev:reset-board xmlns:dev="urn:huawei:params:xml:ns:yang:huawei-device">
<dev:slot-index>LPU2</dev:slot-index>
<dev:reset-reason>configuration-disaccord-with-controller</dev:reset-reason>
</dev:reset-board>
</rpc>
Response Example
<?xml version='1.0' encoding='UTF-8'?> <rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="33"> <ok/> </rpc-reply>