Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for Stacks
Table 1-5 Default settings for stacks
Parameter |
Default Setting |
|---|---|
Stacking function |
Disabled |
Stack member ID |
1 |
Stack domain ID |
No default value |
Stack priority |
100 |
Stack MAC address switching delay |
0 minutes (no switching) |