Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Saving VS Configurations
Context
A VS has independent configuration files as the physical system (PS) does. When the VS is restarted or shut down, configurations on the VS may be lost. To prevent this situation, save the configurations after services are configured.
The PS administrator can run commands in the Admin-VS to save configurations of all VSs, but the VS administrator can only save configurations of the local VS.
Procedure
- Save configurations of all VSs as a PS administrator.
- Run the save all virtual-systems command in the user view of the PS to save configurations of all VSs.
- Save configurations of the local VS as the VS administrator.
- Run the save command in the user view of the VS to save configurations of the local VS.