Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Delay Before VS Ports Become Up
Context
During a VS startup, the peer device will send traffic to the VS after detecting that the VS's ports become Up. As a result, traffic will be lost for a long period of time because the local VS configuration has not been restored. To prevent traffic loss, set the delay before VS ports can become Up so that the ports can become Up after the local VS configuration has been restored.
Procedure
- Run switch virtual-system vs-name
Switch from the admin-VS to the specified VS.
- Run system-view
The system view is displayed.
- Run set vs port up-delay up-delay
The delay before VS ports become Up is set.
By default, VS ports become Up immediately when a VS starts.
- Run commit
The configuration is committed.