Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Restarting a VS
Context
The physical system (PS) administrator and
VS administrator can restart a VS. The PS administrator can run commands
in the Admin-VS to restart a VS; the VS administrator can restart
a local VS after logging in to the VS.![]()
Only a non-admin-VS can be restarted.
It is not recommended to restart multiple VSs at the same time. Otherwise, the VS configurations may be incorrect.
Before restarting a VS, save configurations on the VS; otherwise, the configurations may get lost.
During the VS restart, all interfaces on the VS are shut down, services are interrupted, and users on the VS are disconnected.
During the restart of a VS, service traffic will be interrupted for a certain period after ports of the VS become Up again. You are advised to shut down the ports of the VS before restarting the VS and enable the ports 1 minute after the VS is restarted.