Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the Stack Single-Link Alarm
Context
If there is only one Up SIP link between two member switches, the stack has low reliability and is more likely to split. By default, a stack sends a single-link alarm to indicate a risk. If you do not focus on this alarm, disable the alarm.
Procedure
- Run the system-view command to enter the system view.
- Run the stack command to enter the stack management view.
- Run the stack alarm single-link enable command to enable the stack single-link alarm.
By default, the stack single-link alarm is enabled.
This command can be executed only when the stacking function has been enabled.
- Run the commit command to commit the configuration.
