Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Compute Nodes
Procedure
- Change the following initial passwords:
- Initial password of the default iBMC user
- Initial iBMC U-Boot password
- Check compute nodes.
- Ensure that the compute node version meets site requirements.
- Ensure that no alarm is generated for the compute nodes.
- Set an iBMC IP address for a compute node.
- The default iBMC IP address of the compute node is 192.168.2.100. When connecting the compute node to the switch, allocate and configure the IP address based on the customer's requirements to prevent IP address conflicts.
- For details about how to configure compute nodes, see Atlas 900 Compute Node User Guide (Liquid Cooling).
- Configure the BIOS settings of the compute node, including the boot mode, NIC PXE function, and BIOS password.
- Install an OS for the compute nodes.
- Upgrade software or firmware, and install or update drivers to the latest versions.
