Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Management Module
For details about how to configure a management module, see Atlas 900 PoD RM210 Management Module User Guide (AC).
Procedure
- Log in to the iRM WebUI. For details, see Logging In to the iRM WebUI.
- Change the initial password of the default user of the management module.
- Check the management module.
- View the indicators on the panel and verify that the management module status is normal.
- Query the management module version and ensure that the version meets site requirements.
- Set an IP address for the management module.
- Add a new user.
The added user can be used to log in to the management module for routine maintenance.
