Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Unpacking an Air/Liquid Heat Exchanger
- Before unpacking an air/liquid heat exchanger, check whether the outer packing and seals are in good condition.
If the outer packing is damaged (for example, the outer packing is soaked or deformed, or the seals or pressure-sensitive adhesive tape is unsealed), keep the field evidence and provide feedback to the supplier or Huawei Technologies Co., Ltd.
- After unpacking the air/liquid heat exchanger, check the model and quantity of objects in the packing case against the packing list and sign the packing list.
If the quantity or model of any device does not conform to the packing list, store the unpacked devices, unpacked packages, and packing materials indoors properly, take photos of the storage site, rusty or corroded devices, packing cases, and packaging materials, and archive the photos.
- Use a forklift to move the air/liquid heat exchanger to the equipment room and take away the forklift.Figure 8-69 Moving an air/liquid heat exchanger
- Use a box cutter or diagonal pliers to cut the packing straps on the outer packing.
Exercise caution with the box cutter to avoid injury to your hands or damage to devices.
- Remove the outer packing of the air/liquid heat exchanger.Figure 8-70 Removing the outer packing of the air/liquid heat exchanger
