CloudEngine S5700 Series Switches Hardware Description (V600)

S5735-L24P4S-A-V2 (98012021)

S5735-L24P4S-A-V2 (98012021)

Overview

Table 4-343 Basic information about the S5735-L24P4S-A-V2
Item Details
Description S5735-L24P4S-A-V2 (24*10/100/1000BASE-T ports, 4*GE SFP ports, PoE+, AC power)
Part Number 98012021
Model S5735-L24P4S-A-V2
First supported version V600R022C01

Components

Figure 4-110 S5735-L24P4S-A-V2 appearance

1

One MODE button

2

Twenty-four 10/100/1000BASE-T PoE+ ports

3

Four 1000BASE-X ports

4

One console port

5

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

6

Ground screw

NOTE:
It is used with a ground cable.

7

Jack for AC power cable locking strap

NOTE:
The AC power cable locking strap is not delivered with the switch.

8

AC socket

NOTE:

It is used with an AC power cable.

Ports

Table 4-344 Ports on the S5735-L24P4S-A-V2
Port Connector Type Description Available Components
10/100/1000BASE-T port RJ45 A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.

Ethernet cable

1000BASE-X port SFP A 1000BASE-X port can send and receive data at 1000 Mbit/s.
Console port RJ45 The console port is connected to a console for on-site configuration.

Console cable

Indicators and Buttons

The S5735-L24P4S-A-V2 has similar indicators to those on the S5735-L8P2T4X-A-V2. For details, see the S5735-L8P2T4X-A-V2.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules. The built-in power module can provide 400 W PoE power, which ensures full PoE power on 24 ports in compliance with 802.3af or on 13 ports in compliance with 802.3at.

Heat Dissipation System

The switch has two built-in fans for forced air cooling. Air flows in from the left side and front panel, and exhausts from the right side.

When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device startup.

This figure only shows the airflow direction and does not depict the actual device.

Technical Specifications

Table 4-345 Technical specifications of the S5735-L24P4S-A-V2
Item Specification
Dimensions without packaging (H x W x D) [mm(in.)]

Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)

Dimensions with packaging (H x W x D) [mm(in.)] 90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.)
Chassis height [U] 1 U
Installation type
  • Rack mounting
  • Desk mounting
  • Wall mounting
Chassis material Metal
Weight without packaging [kg(lb)] 2.92 kg (6.44 lb)
Weight with packaging [kg(lb)] 3.79 kg (8.36 lb)
Typical power consumption [W] 36.32 W
Typical heat dissipation [BTU/hour] 123.93 BTU/hour
Maximum power consumption [W]
  • Without PoE: 43.35 W
  • Full PoE load: 484.91 W (PoE: 400 W)
Maximum heat dissipation [BTU/hour]
  • Without PoE: 147.91
  • Full PoE load: 1654.56
Static power consumption [W] 27.07 W
MTBF [years] 60.18 years
MTTR [hours] 2 hours
Availability > 0.99999
Noise at normal temperature (acoustic power) [dB(A)] 49.3 dB(A)
Noise at normal temperature (acoustic pressure) [dB(A)] 37.3 dB(A)
Number of card slots 0
Number of power slots 0
Number of fans modules 2
Switching capacity To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Packet forwarding rate To obtain data of this specification item, see the corresponding datasheet or contact the product sales personnel.
Redundant power supply Not supported
Long-term operating temperature [°C(°F)] -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.)
Restriction on the operating temperature variation rate [°C(°F)]

When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Devices cannot start when the temperature is lower than 0°C (32°F).

Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH (non-condensing)
Long-term operating altitude [m(ft.)] 0–5000 m (0–16404 ft.)
Storage altitude [m(ft.)] 0-5000 m (0-16404 ft.)
Power supply mode AC built-in
Rated input voltage [V]
  • AC input: 100 V AC to 240 V AC, 50/60 Hz
  • High-voltage DC input: 240 V DC
Input voltage range [V]
  • AC input: 90 V AC to 290 V AC; 45 Hz to 65 Hz
  • High-voltage DC input: 190 V DC to 290 V DC
Maximum input current [A] 6 A
Memory 2 GB
Flash memory Physical space: 1 GB
Console port RJ45
Eth Management port Not supported
USB Not supported
RTC Not supported
RPS input Not supported
Service port surge protection [kV] Common mode: ±7 kV
Power supply surge protection [kV] Differential mode: ±6 kV; common mode: ±6 kV
Ingress protection level (dustproof/waterproof) IP20
Types of fans Built-in
Heat dissipation mode Air cooling for heat dissipation, intelligent fan speed adjustment
Airflow direction Air intake from left and front, air exhaustion from right
PoE Supported
Maximum PoE power consumption [W] 400 W
PoE+ power interfaces 24
PoE++ power interfaces -
Full load PoE power consumption 15.4W (802.3af) 24
Full load PoE power consumption 30W (802.3at) 13
Full load PoE++ power consumption 60W (802.3bt) -
Full load PoE++ power consumption 90W (802.3bt) -
Certification

EMC certification

Safety certification

Manufacturing certification

Translation
Favorite
Download
Update Date:2024-08-13
Document ID:EDOC1100277349
Views:264329
Downloads:5146
Average rating:0.0Points

Digital Signature File

digtal sigature tool