F600C-30-1GH Datasheet 04
Datasheet
F600C-30-1GH Datasheet
Overview
Huawei OptiXstar F600C-30-1GH is an Optical AP that supports Wi-Fi 6 for enterprises. It provides ultra-broadband access
through optical fibers in the upstream direction and works with a primary gateway device to realize gigabit Wi-Fi coverage for
enterprises.
The schematic diagrams in this document may differ from the actual product.
Highlight
⚫ Supports Wi-Fi 6, 160 MHz frequency band, and an air interface rate of 3 Gbit/s. The maximum test rate reaches 1.2 Gbit/s.
⚫ Based on the OFDMA technology, a single secondary device supports 64 concurrent connections.
F600C-30-1GH Datasheet 1
⚫ Supports seamless Wi-Fi roaming with a handover latency about 100 ms.
⚫ Photoelectric composite cables supply power to remote secondary devices, eliminating difficulties in power acquisition.
⚫ Features high efficiency and stability, strong anti-interference capability, and wide coverage.
Hardware Specifications
Dimensions (H x 38 mm x 200 mm x 200 mm Weight About 0.6kg
W x D) (excluding
adapter)
Power supply 12 V DC, 1.5 A (power obtained through Rated input 100~240 V AC,50/60 Hz
adapter) range of power
56 V DC, 0.3 A (POF* power supply) adapter
Static power 6W Maximum power 11W
consumption consumption
Fiber port GPON upstream transmission (port type: Button Reset button
XC/UPC)
Ports NNI: GPON Indicator One WLAN running indicator
UNI: 1 GE + 2.4 GHz & 5 GHz Wi-Fi 6
Operating –10°C to +50°C Installation mode Ceiling-mounted installation
Temperature
Operating 5%–95% RH, non-condensing - -
humidity
*POF refers to photoelectric composite cable.
Use a power adapter that complies with related safety standards or has passed the CE certification. Otherwise, the device may
be damaged.
Wi-Fi Specifications
Supported IEEE 802.11 ax (2.4GHz&5GHz) MIMO 2 x 2 MIMO (2.4 GHz & 5 GHz)
protocol
Antenna gain 5 dBi Air interface 574 Mbps (2.4 GHz)
rate 2402 Mbps (5 GHz)
Maximum Tx 23 dBm Frequency 20/40/80/160 MHz
power NOTE band
The actual Tx power varies with local
laws and regulations.
Others 1024-QAM, WPA3, DL MU MIMO - -
PortParameters
Optical port Gigabit Ethernet port
F600C-30-1GH Datasheet 2
⚫ Downstream rate: 2.488 Gbit/s; upstream rate: 1.244 ⚫ MAC address limit
Gbit/s ⚫ MAC address learning
⚫
Plug-and-play ⚫ 10 Mbit/s, 100 Mbit/s, and 1000 Mbit/s auto-sensing
⚫ Receiver sensitivity: -27 dBm to -29 dBm
⚫ Overload optical power: –8 dBm
Product Functions
MiniFTTO Networking Scenario
Enterprise network Smart connectivity
⚫ Working with the primary gateway to realize all-optical ⚫ Upstream transmission modes: optical fiber
Wi-Fi coverage for enterprises ⚫ Working mode: bridge mode
− No electromagnetic interference and low latency O&M
− Automatic networking and plug-and-play ⚫ Web UI
− Automatic Wi-Fi configuration synchronization ⚫ Software dual-backup and rollback
− Automatic Wi-Fi channel selection for the primary
gateway device
− Proactive Wi-Fi roaming (802.11k/802.11v) for the
primary gateway device with a handover latency
about 100 ms
*: User terminals must support 802.11k/802.11v.
Typical Application
MiniFTTO networking scenario
F600C-30-1GH Datasheet 3
Copyright © Huawei Technologies Co., Ltd. 2024. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and
Huawei Technologies Co., Ltd.
recommendations in this document are provided "AS IS" without warranties, guarantees or representations of
any kind, either express or implied. Address:Huawei Industrial Base Bantian,
Longgang Shenzhen 518129 People's
The information in this document is subject to change without notice. Every effort has been made in the
Republic of China
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied. Website:https://ekit.huawei.com
F600C-30-1GH Datasheet 4
F600C-30-1GH Datasheet
Overview
Huawei OptiXstar F600C-30-1GH is an Optical AP that supports Wi-Fi 6 for enterprises. It provides ultra-broadband access
through optical fibers in the upstream direction and works with a primary gateway device to realize gigabit Wi-Fi coverage for
enterprises.
The schematic diagrams in this document may differ from the actual product.
Highlight
⚫ Supports Wi-Fi 6, 160 MHz frequency band, and an air interface rate of 3 Gbit/s. The maximum test rate reaches 1.2 Gbit/s.
⚫ Based on the OFDMA technology, a single secondary device supports 64 concurrent connections.
F600C-30-1GH Datasheet 1
⚫ Supports seamless Wi-Fi roaming with a handover latency about 100 ms.
⚫ Photoelectric composite cables supply power to remote secondary devices, eliminating difficulties in power acquisition.
⚫ Features high efficiency and stability, strong anti-interference capability, and wide coverage.
Hardware Specifications
Dimensions (H x 38 mm x 200 mm x 200 mm Weight About 0.6kg
W x D) (excluding
adapter)
Power supply 12 V DC, 1.5 A (power obtained through Rated input 100~240 V AC,50/60 Hz
adapter) range of power
56 V DC, 0.3 A (POF* power supply) adapter
Static power 6W Maximum power 11W
consumption consumption
Fiber port GPON upstream transmission (port type: Button Reset button
XC/UPC)
Ports NNI: GPON Indicator One WLAN running indicator
UNI: 1 GE + 2.4 GHz & 5 GHz Wi-Fi 6
Operating –10°C to +50°C Installation mode Ceiling-mounted installation
Temperature
Operating 5%–95% RH, non-condensing - -
humidity
*POF refers to photoelectric composite cable.
Use a power adapter that complies with related safety standards or has passed the CE certification. Otherwise, the device may
be damaged.
Wi-Fi Specifications
Supported IEEE 802.11 ax (2.4GHz&5GHz) MIMO 2 x 2 MIMO (2.4 GHz & 5 GHz)
protocol
Antenna gain 5 dBi Air interface 574 Mbps (2.4 GHz)
rate 2402 Mbps (5 GHz)
Maximum Tx 23 dBm Frequency 20/40/80/160 MHz
power NOTE band
The actual Tx power varies with local
laws and regulations.
Others 1024-QAM, WPA3, DL MU MIMO - -
PortParameters
Optical port Gigabit Ethernet port
F600C-30-1GH Datasheet 2
⚫ Downstream rate: 2.488 Gbit/s; upstream rate: 1.244 ⚫ MAC address limit
Gbit/s ⚫ MAC address learning
⚫
Plug-and-play ⚫ 10 Mbit/s, 100 Mbit/s, and 1000 Mbit/s auto-sensing
⚫ Receiver sensitivity: -27 dBm to -29 dBm
⚫ Overload optical power: –8 dBm
Product Functions
MiniFTTO Networking Scenario
Enterprise network Smart connectivity
⚫ Working with the primary gateway to realize all-optical ⚫ Upstream transmission modes: optical fiber
Wi-Fi coverage for enterprises ⚫ Working mode: bridge mode
− No electromagnetic interference and low latency O&M
− Automatic networking and plug-and-play ⚫ Web UI
− Automatic Wi-Fi configuration synchronization ⚫ Software dual-backup and rollback
− Automatic Wi-Fi channel selection for the primary
gateway device
− Proactive Wi-Fi roaming (802.11k/802.11v) for the
primary gateway device with a handover latency
about 100 ms
*: User terminals must support 802.11k/802.11v.
Typical Application
MiniFTTO networking scenario
F600C-30-1GH Datasheet 3
Copyright © Huawei Technologies Co., Ltd. 2024. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and
Huawei Technologies Co., Ltd.
recommendations in this document are provided "AS IS" without warranties, guarantees or representations of
any kind, either express or implied. Address:Huawei Industrial Base Bantian,
Longgang Shenzhen 518129 People's
The information in this document is subject to change without notice. Every effort has been made in the
Republic of China
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied. Website:https://ekit.huawei.com
F600C-30-1GH Datasheet 4
Note: The preview effect may be slightly different from the source document. You can download the document and view it on your PC.