Atlas Center Training Server 23.0.3 (and Later) npu-smi Command Reference 06

About This Document

Overview

This document describes how to use information query commands of the npu-smi tool to query the tool version, help information, and other necessary information. It also explains how to use the function setting commands to set specific functions.

This document applies to the Atlas 800 training server (model 9000), Atlas 800 training server (model 9010), Atlas 900T RAK compute node, and Atlas 900 compute node.

Intended Audience

This document is intended for:

Huawei technical support engineers
Channel partners' technical support engineers
Enterprise administrators
Enterprise end users

Symbol Convention

Symbols that may be found in this document are defined as follows:

Symbol	Description
	Indicates a hazard with a high level of risk which, if not avoided, could result in death or serious injury.
	Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury.
	Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.
	Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or other unanticipated results. NOTICE is used to address practices not related to personal injury.
	Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Issue	Release Date	Description
06	2024-12-31	This issue is the sixth official release. Added the following description to the "Usage Guidelines" in Querying Details: This command cannot be used to obtain the board ID in the computing power allocation scenario. Added the following description to the "Usage Guidelines" in Querying Information About a Chip: This command cannot be used to obtain the board ID in the computing power allocation scenario if chip_id is set to an MCU chip ID.
05	2024-09-10	This issue is the fifth official release. Added notes to "Usage Guidelines" in Clearing the ECC Error Counts of All Chips, Clearing the ECC Error Count of a Chip, Clearing the ECC Error Counts of All Chips, and Clearing the ECC Error Count of a Chip.
04	2024-08-05	This issue is the fourth official release. Changed the version number to 23.0.3 and later versions.
03	2024-04-19	This issue is the third official release. Modified the example command output in Printing Information Query Help. Added Querying the Lane Information of the HCCS Port.
02	2024-03-21	This issue is the second official release. Updated the document version from 23.0.0 to 23.0.3. Updated the driver version from 23.0.0 to 23.0.2. Updated the firmware version from 6.3.6.1 to 7.1.0.4.220.
01	2024-01-05	This issue is the first official release.

Translation

Favorite

Download

Update Date：2025-03-04

Document ID：EDOC1100349198

Downloads：74

Average rating：0.0Points

Digital Signature File

digtal sigature tool