FusionSolar Residential Smart PV Solution Brochure 2025 for Global(Compressed)

Copyright © 2025 Huawei Digital Power Technologies Co., Ltd. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Digital Power Technologies Co., Ltd.

Trademark Notice

, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other
trademarks, product, service and company names mentioned are the property of their respective owners.

General Disclaimer

The information in this document may contain predictive statements including, without limitation,
statements regarding the future financial and operating results, future product portfolio, new technology,
etc. There are a number of factors that could cause actual results and developments to differ materially
from those expressed or implied in the predictive statements. Therefore, such information is provided for
reference purpose only and constitutes neither an offer nor an acceptance. Huawei Digital Power
Technologies Co., Ltd. may change the information at any time without notice.

HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.

Antuoshan Headquarters Towers, 33 Antuoshan 6th Road, Futian District, Shenzhen, P.R.C.
solar.huawei.com
A HOME THAT ALWAYS SHINES
Our Mission

FusionSolar Residential Smart PV provides a one-fits-all solution from power generation,
storage, to charging and power consumption. We always maximize efficiency and safety to
power more households for a better, smarter, and more sustainable future

By the end of 2024,

FusionSolar has provided clean energy for 3.9 million homes in over 170 countries


I FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution II
ABOUT
FUSIONSOLAR

5000+ Global Partners
1141.3 710 970
Billion kWh Million Tons of Million Equivalent 360+ 100+ 4200+

Green Power Generated CO2 Emissions Trees Planted Sales Service Certified
Reduced Partners Partners Installers


Global Technical Support and Global Research
140+ Spare Parts Centers 17 Centers
5 9 2 130+
Technical Spare Parts Spare Parts National Spare 5 12 10%+
Support Operation Repair Parts Logistics
Competence R&D Centers of Revenue on
Centers Centers Centers Centers
Centers R&D


*Based on data available as of 2024.12


III FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution IV
LEADING INNOVATIONS FOR THE
MOST VALUABLE CREATIONS


Leading Smart Grid-connection


Leading the Continuous
Upgrade of System Safety


Leading
Digital and
Intelligent
Upgrade

Leading Energy Storage System
Architecture Innovation


Leading String
Inverters into the
Mainstream


V FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution VI
MAKE SMART PV ACCESSIBLE TO
EVERY HOME

For Artists For the Seniors

It's better to add a touch of I may be grey, but my
green to the earth than to power is green.
the canvas.


For Professionals For Young People

Green is the new black. Green energy gets you
energized.


For Homeowners For Children

Visibility and control of your energy Future generations deserve a
on the go. greener planet.


VII FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution VIII
A HOME THAT ALWAYS SHINES CONTENTS


SOLUTION PRODUCT
VALUE COLLECTION
P01 P13


SERVICE CASE
P59 STUDY
P65


IX FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution X
SOLUTION
VALUE
PRODUCT
COLLECTION


01 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 02
FUSIONSOLAR RESIDENTIAL
SMART PV SOLUTION

Smart Energy Controller Smart Module Controller Smart String ESS SmartGuard Energy Management
Assistant
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1
SUN2000-450W-P2
(Single-Phase) LUNA2000-5/10/15-S0 SmartGuard-63A-S0
SUN2000-600W-P (Single-Phase)
SUN2000-3/3.68/4/4.6/5/6K-LB0 EMMA-A02
(Single-Phase)
MERC-1100W-P
SUN2000-8/10K-LC0 MERC-1300W-P SmartGuard-63A-T0/AUT0
(Single-Phase) LUNA2000-7/14/21-S1 (Three-Phase)
FusionSolar Smart
SUN2000-3/4/5/6/8/10KTL-M1 PVMS & App
(Three-Phase) Smart Charger

SUN2000-5/6/8/10/12K-MAP0 SCharger-7KS-S0
(Three-Phase) (Single-Phase)

SUN2000-12/15/17/20/25K-MB0 SCharger-22KT-S0
Smart Module
(Three-Phase) (Three-Phase)
Controller
*Available in specific regions only
SUN5000-8/12K-MAP0
(Three-Phase)

SUN5000-17/25K-MB0
(Three-Phase)


FusionSolar
App

SmartGuard


Smart Charger
Smart Energy
Controller


Smart
String ESS


03 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 04
FUSIONSOLAR RESIDENTIAL
SMART PV SOLUTION


Residential
SmartGuard
Energy Ecosystem


Smart PV
Management System


Smart Energy Smart
Controller Charger


Smart Module
Controller

Smart String ESS


Energy
Management
Assistant


05 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 06
Safety Under the Rooftop
SHINE ON ACTIVE SAFETY Unique 5-layer ESS Safety Protection in the Industry

System Safety is always our priority. FusionSolar Residential Smart PV Solution meets the
highest industry standard to ensure safety with advanced technologies applied in optimizers,
inverters, and energy storage system.

Safety On the Rooftop
Making DC Safety Protection a Mainstream Feature

Structural Protection Emergency Protection
Rapid shutdown, safe voltage AFCI, active arc protection

30s 30V


Shutdown Time Voltage TÜV Certification

Meets NEC 2017&2020
Electrical Protection Cell-level Protection Active Protection


07 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 08
SHINE ON FULL JOURNEY One supplier for all products
CONVENIENCE

ONE-FITS-ALL Optimizer Inverter Storage Charger Consumption Management

One solution for all scenarios

One Supplier On-Grid /
More business opportunities and Off-Grid

lower time costs One optimizer for all One inverter for on-grid One ESS for single-phase One app for all functions
types of modules and off-grid scenarios and 3-phase inverters


Easier Purchase, Wider Utilization
One Solution

Extremely quick and
Smart Design 2.0 SmartGuard for
easy installation with less effort whole home backup

One Service
Window

Reliable digital management and
stress-free O&M

0 Modification for
Design Easily, Sell Professionally
Whole Home Backup


Commissioning with setup assistant Remote diagnosis Real-time data

Disconnection PV panel Rapid data
Setting basic Device Connect to Automatic Automatic
Create Plant detection fault locating
parameters management FusionSolar device binding layout refreshing


One-stop Commissioning with Intelligent Management
Setup Assistant without Site Visit


09 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 10
SHINE ON ENERGY-USING
PROSPECT

FusionSolarUSING Residential PROSPECT Smart PV Solution provides stable and reliable power
and supports seamless on-grid/off-grid switchover


Higher energy yield More energy storage Seamless switchover


Intelligent management Attractive design


The design of the product appearance
integrates natural elements with
technologies. All product outlines,
colors, and styles are consistent.
Smart charger and FusionSolar APP
have won the iF Product Design
Award.


11 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 12
PRODUCT
COLLECTION


13 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 14
Technical Specification

Technical Specification SUN5000-8K-MAP0 SUN5000-12K-MAP0
Efficiency
FUSIONSOLAR RESIDENTIAL SMART PV SOLUTION Max. efficiency 98.6% 98.6%
European weighted efficiency 98.0% 98.2%
SUN5000 Series Input (PV)
Recommended max. PV power 14,600 Wp 22,000 Wp
Max. input voltage 1 1100 V
Operating voltage range 2 160–1000 V
Startup voltage 160 V
Rated input voltage 600 V
Max. input current per MPPT 16 A
Max. short-circuit current 22 A
Number of MPP trackers 2
Max. input per MPP tracker 1
Input (DC Battery)
Compatible battery LUNA2000-5/10/15-S0 / LUNA2000-7/14/21-S1
Operating voltage range 600–980 V
Max. operating current 20 A
Max. charging power 12,000 W
Max. discharging power 8000 W 12,000 W
Output (On Grid)
Grid connection Three-phase
Rated output power 8000 W 12,000 W
Efficiency Evolution Safety Evolution Convenience Evolution Max. apparent power 8800 VA 13,200 VA
Creating Profitable Return Protecting Electricity Usage Safety Embracing PV Lifestyle Rated output voltage 220 V AC/380 V AC, 230 V AC/400 V AC, 240 V AC/415 V AC 3W/N + PE
Overload capability 110%
Module-level Optimization On the Rooftop Module-level Management Rated AC grid frequency 50 Hz/60 Hz
Increasing Yield by 5% to 30% AFCI + RSD Disconnection Detection and Location Max. output current 13.3 A 20.2 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3%
Technical Specification SUN2000-450W-P2 SUN2000-600W-P Output (Off Grid)
Compatible backup device SmartGuard-63A-T0 (3 phase)
Input Rated output power 8000 W 12,000 W
Rated input DC power 1 450 W 600 W Rated output voltage 220 V AC/380 V AC, 230 V AC/400 V AC, 240 V AC/415 V AC 3W/N + PE
110% overload Continuous
Absolute max. input voltage 80 V 150% overload 5 min (3-phase) / 5 min (Single-phase) 1 min (3-phase) / 5 min (Single-phase)
200% overload 10 seconds
MPPT operating voltage range 10–80 V Automatic switchover time ≤ 20 ms (with SmartGuard-63A-T0)
Max. short-circuit current (Isc) 14.5 A Protection Feature
Asymmetric load Yes, supports 100% three-phase asymmetric load
Max. efficiency 99.5% Input-side disconnection device Yes
Weighted efficiency 99.0% Anti-islanding protection Yes
DC reverse polarity protection Yes
Overvoltage category II Insulation detection Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Output AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Max. output voltage 80 V Residual current detection Yes
AC overcurrent protection Yes
Max. output current 15 A AC short-circuit protection Yes
Output bypass 2 Yes AC overvoltage protection Yes
Arc fault protection Yes
Output voltage during standby 3 0 V Terminal temperature detection Yes (PV &Battery & Optimizer connectors)
Ripple receiver control Yes
Output impedanceduring standby 1 kΩ ± 10%
Battery charging from grid Yes
Communication RSD function Yes
General Specification
Communication protocol MBUS Operating temperature range –25°C to +60°C (–13°F to +140°F)
Relative operating humidity 0 % - 100% RH
Standards Compliance Max. operating altitude 4000 m
Safety      IEC62109-1 (class II safety) Cooling Natural convection
Noise ≤ 29 dB
RoHS Yes Display LED Indicators; Integrated WLAN + FusionSolar APP
RS485; WLAN / Ethernet via Smart Dongle-WLAN-FE (Optional)
Fire Safety VDE-AR-E 2100-712:2018-12 Communication
4G/3G/2G via Smart Dongle-4G (Optional); EMMA (Optional)
General Specifications Weight (incl. mounting brackets) 21 kg
Dimensions (incl. mounting
Dimensions (W x H x D) 75 mm x 140 mm x 28 mm (3.0 in. x 5.5 in. x 1.1 in.) 490 mm x 460 mm x 130 mm
brackets)
Weight (including cables) 0.6 kg (1.3 lb.) IP rating IP66
Installation part (optional) Frame mounting bracket/T-shaped bolt 4 Nighttime power < 5.5 W
Optimizer Compatibility
Input connector Staubli MC4 DC MBUS compatible optimizer 3 SUN2000-450W-P2, SUN2000-600W-P
Input wire length 0.15 m (0.49 ft.) Standards Compliance (More Available Upon Request)
Safety EN/IEC62109-1, EN/IEC62109-2
Output connector Staubli MC4 IEC61727, IEC62116, MEA/PEA, G99/G100, Philippine Grid Code Resolution No. 07, NRS 097-2-1, EN50549-1,
Output wire length 1.3 m (4.3 ft.) Grid connection standards VDE4105, UTE15-712-1/VFR 2019, UNE217002, NTS631, RD244(UNE217001), PPDS, ROGA, TOR Erzeuger,
CEI 0-21:2020-12 V1, C10/C11
Operating temperature/humidity range –40°C to +85°C 5/0%-100%
PV System Design 4 SUN5000-8K/12K-MAP0
IP rating IP68 Min. string length (power optimizers) 6
Max. string length (power optimizers) 35
*1 The maximum power of PV module at STC shall NOT exceed the "Rated Input DC Power" of the power optimizer. PV modules with up to +5% power tolerance are allowed. Max. DC power per string 12,000 W
*2 Any power optimizer, which is connected to an operating inverterin a PV string, will be bypassed when it fails.
*1 The max. input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage the inverter.
*3 Once the power optimizer stops working, its output voltage is reduced to 0 V. *2 Any DC input voltage beyond the operating voltage range may result in inverter malfunction.
*4 It is for PV module frame/extruded aluminum profile racking system installation. *3 The SUN5000 Series Inverters must be fully equipped with optimizers, otherwise the system will report errors and can not work.
*5 When the operating temperature of the SUN2000-450W-P2/600W-P reaches 70 °C to 85 °C, it may shut down due to over-temperature protection and report an over-temperature *4 SUN2000-450W-P2/600W-P, MERC-600W-PA0 can NOT be used in mixture under the same Smart Energy/PV Controller.
alarm. After the temperature decreases, it can automatically resume working without causing any damage.
Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

15 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 16
Technical Specification

FUSIONSOLAR RESIDENTIAL SMART PV SOLUTION Technical Specification SUN5000-17K-MB0 SUN5000-25K-MB0
Efficiency
SUN5000 Series Max. efficiency 98.4% 98.4%
European weighted efficiency 98.1% 98.2%
DC Input
Recommended max. PV power 25,500 Wp 37,500 Wp
Max. input voltage 1 1,100 V
Max. input current per MPPT 30 A (two strings) / 20 A (single string)
Max. short-circuit current 40 A
Start-up voltage 200 V
MPPT operating voltage range 2 200 V–1,000 V
Full-load MPPT voltage range 440 V–800 V 530 V–800 V
Rated input voltage 600 V
Max. number of inputs 4
Number of MPP trackers 2
Smart String Energy Storage System Terminal
Compatible Smart String ESS LUNA2000-5/10/15-S0, LUNA2000-7/14/21-S1
Number of terminals 2
Max. charging power 21 kW (Single string) / 25 kW (Two strings)
Efficiency Evolution Safety Evolution Convenience Evolution
Max. discharge power 18.7 kW 25.0 kW
Creating Profitable Return Protecting Electricity Usage Safety Embracing PV Lifestyle Max. operating current 26.25 A (per string)
Module-level Optimization On the Rooftop Module-level Management Operating voltage range 600 V–980 V
Increasing Yield by 5% to 30% AFCI + RSD Disconnection Detection and Location Output
Rated output power 17,000 W 25,000 W
Max. apparent power 18,700 VA 27,500 VA
Technical Specification SUN2000-450W-P2 SUN2000-600W-P Max. active power (cosφ = 1) 18,700 W 27,500 W
Input Rated output voltage 220 Vac / 380 Vac, 230 Vac / 400 Vac, 240 Vac / 415 Vac; 3 W / N + PE
Rated output current 24.5 A / 400 Vac 36.1 A / 400 Vac
Rated input DC power 1 450 W 600 W
Max. output current 28.6 A / 380 Vac 42.0 A / 380 Vac
Absolute max. input voltage 80 V Rated AC grid frequency 50 Hz / 60 Hz
MPPT operating voltage range 10–80 V Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3%
Max. short-circuit current (Isc) 14.5 A
Feature & Protection
Max. efficiency 99.5% Overvoltage category PV II /AC III
Input-side disconnection device Yes
Weighted efficiency 99.0%
Anti-islanding protection Yes
Overvoltage category II AC over-current protection Yes
Output DC reverse-polarity protection Yes
DC surge protection TYPE II
Max. output voltage 80 V
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Max. output current 15 A DC insulation resistance detection Yes
Output bypass 2 Yes Residual current monitoring unit Yes
Output voltage during standby 3 0 V Arc fault protection Yes
RSD function Yes
Output impedanceduring standby 1 kΩ ± 10%
General Data
Communication Operating temperature range -25 °C–60 °C (-13 °F–140 °F)
Communication protocol MBUS Relative humidity 0 % RH–100 % RH
Max. operating altitude 4,000 m (13,123 ft.) (Derated above 2000 m)
Standards Compliance
Cooling Smart air cooling
Safety      IEC62109-1 (class II safety) Display LED indicators, Integrated WLAN + FusionSolar APP
RS485; WLAN / Ethernet via Smart Dongle-WLAN-FE (Optional)
RoHS Yes Communication
4G / 3G / 2G via Smart Dongle-4G (Optional); EMMA (Optional)
Fire Safety VDE-AR-E 2100-712:2018-12
Weight 21 kg
General Specifications Dimensions (W x H x D) 546 x 460 x 228 mm
Dimensions (W x H x D) 75 mm x 140 mm x 28 mm (3.0 in. x 5.5 in. x 1.1 in.) Protection level IP66
Max. number of paralleled unit
3
Weight (including cables) 0.6 kg (1.3 lb.) (with Smart String ESS)
Installation part (optional) Frame mounting bracket/T-shaped bolt 4 Optimizer Compatibility
3
Input connector Staubli MC4 DC MBUS Compatible optimizer SUN2000-450W-P2, SUN2000-600W-P
Input wire length 0.15 m (0.49 ft.) Standards Compliance (More Available Upon Request)
Certificates EN/IEC62109-1, EN/IEC62109-2
Output connector Staubli MC4
Output wire length 1.3 m (4.3 ft.) PV System Design 4 SUN5000-17/25K-MB0
Operating temperature/humidity range –40°C to +85°C 5/0%-100% Min. string length (power optimizers) 6
Max. string length (power optimizers) 35
IP rating IP68
Max. DC power per string 12,000 W

*1 The maximum power of PV module at STC shall NOT exceed the "Rated Input DC Power" of the power optimizer. PV modules with up to +5% power tolerance are allowed.
*2 Any power optimizer, which is connected to an operating inverterin a PV string, will be bypassed when it fails. *1 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
*2 Any DC input voltage beyond the operating voltage range may result in inverter improper operating.
*3 Once the power optimizer stops working, its output voltage is reduced to 0 V.
*3 The SUN5000 Series Inverters must be fully equipped with optimizers, otherwise the system will report errors and can not work.
*4 It is for PV module frame/extruded aluminum profile racking system installation.
*4 SUN2000-450W-P2/600W-P, MERC-600W-PA0 can NOT be used in mixture under the same Smart Energy/PV Controller.
*5 When the operating temperature of the SUN2000-450W-P2/600W-P reaches 70 °C to 85 °C, it may shut down due to over-temperature protection and report an over-temperature
alarm. After the temperature decreases, it can automatically resume working without causing any damage.
Disclaimer: the preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

17 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 18
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1
Technical Specification

SUN2000 SUN2000 SUN2000 SUN2000 SUN2000 SUN2000 SUN2000
Technical Specification
-2KTL-L1 -3KTL-L1 -3.68KTL-L1 -4KTL-L1 -4.6KTL-L1 -5KTL-L1 -6KTL-L1
Efficiency
Max. efficiency 98.2% 98.3% 98.4% 98.4% 98.4% 98.4% 98.4%
SMART ENERGY European weighted efficiency 96.7% 97.3% 97.3% 97.5% 97.7% 97.8% 97.8%
Input (PV)
Recommended max. PV power 1 3,000 Wp 4,500 Wp 5,520 Wp 6,000 Wp 6,900 Wp 7,500 Wp 9,000 Wp
Max. input voltage 600 V
CONTROLLER Startup voltage 100 V
MPPT operating voltage range 90–560 V
Rated input voltage 360 V
Max. input current per MPPT 12.5 A
Max. short-circuit current 18 A
Model: SUN2000-2/3/3.68/4/4.6/5/6KTL-L1 Number of MPP trackers 2
Max. inputs per MPP tracker 1
Input (DC Battery)
Compatible battery LUNA2000-5/10/15-S0, LUNA2000-7/14/21-S1 1
Operating voltage range 350–560 V DC
Max. operating current 15 A
Max. charge power 5,000 W
Max. discharge power 2,200 W 3,300 W 3,680 W 4,400 W 4,600 W 5,000 W 5,000 W
Output (On Grid)
Grid connection Single-phase
Rated output power 2,000 W 3,000 W 3,680 W 4,000 W 4,600 W 5,000 W 6,000 W
Max. apparent power 2,200 VA 3,300 W 3,680 W 4,400 VA 5,000 VA 5,500 W 6,000 VA
Rated output voltage 220 V AC/230 V AC/240 V AC
Rated AC grid frequency 50 Hz/60 Hz
Max. output current 10 A 15 A 16 A 20 A 23 A 25 A 27.3 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3%
Power output Yes (via SmartGuard-63A-S0)
Protection Feature
Anti-islanding protection Yes
DC reverse polarity protection Yes
Insulation monitoring Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Over-heat protection Yes
Arc fault protection Yes
Battery charging from grid Yes
General Specification
Operating temperature range –25°C to +60°C (Derated above 45°C @ Rated output power)
Relative operating humidity 0%–100% RH
Operating altitude 0–4,000 m (Derated above 2,000 m)
Cooling Natural convection
Display LED indicators; integrated WLAN + FusionSolar app
RS485, WLAN via inverter built-in WLAN module, Ethernet via Smart Dongle-WLAN-FE (Optional); 4G/3G/2G via
Communication
Smart Dongle-4G (Optional)
Weight (incl. mounting brackets) 12.0 kg (26.5 lb)
Dimensions (incl. mounting brackets) 365 mm x 375 mm x 156 mm
IP rating IP65
Nighttime power < 2.5 W
Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P2, SUN2000-600W-P
Standards Compliance (More Available Upon Request)
Safety EN/IEC 62109-1, EN/IEC 62109-2
G98, G99, EN 50549-1, CEI 0-21, VDE-AR-N-4105, AS 4777.2, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4,
Grid connection standards
IEC61727, IEC62116

Active Safety Higher Yields Battery Ready
Active Arcing Protection Up to 30% More Energy Plug & Play, Whole-house *1 The inverter max input PV power is 10,000 Wp when long strings are designed and fully connected with optimizers.
with Optimizer Power Backup

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

19 FusionSolar Residential Smart PV Solution Version No.: 04-202411 FusionSolar Residential Smart PV Solution 20
SUN2000-3/3.68/4/4.6/5/6K-LB0
Technical Specification

SUN2000 SUN2000 SUN2000 SUN2000 SUN2000 SUN2000
Technical Specification
-3K-LB0 -3.68K-LB0 -4K-LB0 -4.6K-LB0 -5K-LB0 -6K-LB0
SMART ENERGY Efficiency
Max. efficiency 97.8% 97.8% 97.8% 97.8% 97.8% 97.8%
European weighted efficiency 96.6% 96.8% 96.8% 97.0% 97.1% 97.2%
Input (PV)
Recommended max. PV power 4,500 Wp 5,520 Wp 6,000 Wp 6,900 Wp 7,500 Wp 9,000 Wp
CONTROLLER Max. input voltage 1 600 V
Start-up voltage 50 V
MPPT operating voltage range 3 40–560 V
Rated input voltage 360 V
Model: SUN2000-3/3.68/4/4.6/5/6K-LB0 Max. input current per MPPT 16 A
Max. short-circuit current 20 A
Number of MPP trackers 2
Max. inputs per MPP tracker 1
Input (DC Battery)
Compatible battery LUNA2000-5/10/15-S0, LUNA2000-7/14/21-S1
Operating voltage range 350–560 Vdc
Max. operating current 16.5 A
Max. charge power 6,000 W
Max. discharge power 3,300 W 3,680 W 4,400 W 4,600 W 5,500 W 6,600 W
Output (On Grid)
Grid connection Single-phase
Rated output power 3,000 W 3,680 W 4,000 W 4,600 W 5,000 W 6,000 W
Max. apparent power 3,300 W 3,680 VA 4,400 VA 5,000 VA 5,500 VA 6,600 VA
Rated output voltage 220 V AC/230 V AC/240 V AC
Rated AC grid frequency 50 Hz/60 Hz
Max. output current 15 A 16 A 20 A 23 A 25 A 30 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3%
Backup power output Yes (via SmartGuard-63A-S0)
Protection Feature
Anti-islanding protection Yes
DC reverse polarity protection Yes
Insulation monitoring Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Arc fault protection Yes
Battery charging from grid Yes
General Specification
Operating temperature range –25°C to +60°C (–13°F to +140°F)
Relative operating humidity 0%–100% RH
Operating altitude 0-4,000 m (Derated above 2000 m)
Cooling Natural convection
Display LED Indicators; Integrated WLAN + FusionSolar App
RS485, WLAN via inverter built in WLAN module
Communication Ethernet via Smart Dongle-WLAN FE (Optional);
4G / 3G / 2G via Smart Dongle-4G (Optional); EMMA
Weight (incl. mounting brackets) < 15 kg
Dimensions (incl. mounting plate) 425 mm x 376.5 mm x 150 mm
IP rating IP66
Nighttime power < 3 W
Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P2, SUN2000-600W-P
Standards Compliance (More Available Upon Request)
Safety EN/IEC 62109-1, EN/IEC 62109-2
G98, G99, G100, EN 50549-1, CEI 0-21, VDE-AR-N-4105, C10/11, P140,
Grid connection standards
UTE C15-712, TOR Erzeuger, IEC61727, IEC62116
Active Safety Higher Yields Battery Ready

Active Arcing Protection Up to 30% More Energy Plug & Play Battery *1 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage inverter.
with Optimizer Interface

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

21 FusionSolar Residential Smart PV Solution Version No.: 01-202502 FusionSolar Residential Smart PV Solution 22
SUN2000-8/10K-LC0
Technical Specification

Technical Specification SUN2000-8K-LC0 SUN2000-10K-LC0

Efficiency
SMART ENERGY Max. efficiency 98.1%
European weighted efficiency 97.5%
Input (PV)
Recommended max. PV power 1 12,000 Wp 15,000 Wp
Max. input voltage 600 V
CONTROLLER Startup voltage 50 V
MPPT operating voltage range 40–560 V
Rated input voltage 360 V
Max. input current per MPPT 16 A
Max. short-circuit current 20 A
Model: SUN2000-8/10K-LC0 Max. number of inputs 3
Number of MPP trackers 3
Input (DC Battery)
Compatible battery LUNA2000-5/10/15-S0, LUNA2000-7/14/21-S1
Operating voltage range 350–560 V DC
Max. operating current 25 A
Max. charge power 8,000 W 10,000 W
Max. discharge power 8,000 W 10,000 W
Output (On Grid)
Grid connection Single-phase
Rated output power 8,000 W 10,000 W
Max. apparent power 8,800 VA 10,000 VA
Rated output voltage 220 V AC/230 V AC/240 V AC, L/N+PE
Max. output current 40.0 A 45.5 A
Rated AC grid frequency 50 Hz/60 Hz
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3%
Backup power output Yes (via Smartguard-63A-S0)
Features & Protection
Anti-islanding protection Yes
DC reverse polarity protection Yes
Insulation monitoring Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring unit Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Over-heat protection Yes
Arc fault protection Yes
Battery charging from grid Yes
General Data
Operating temperature range –25°C to +60°C (–13°F to +140°F)
Relative operating humidity 0%–100% RH
Operating altitude 0–4000 m (Derated above 2000 m)
Cooling Natural convection Smart Air Cooling
Display LED indicators; integrated WLAN + FusionSolar app
RS485, WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional)
Communication
4G/3G/2G via Smart Dongle-4G (Optional), EMMA
Weight 14.5 kg 15 kg
Dimensions (W x H x D)
(incl. mounting plate) 425 mm x 376.5 mm x 150 mm
Degree of protection IP66
Optimizer Compatibility
Compatible optimizer SUN2000-450W-P2, SUN2000-600W-P
Standards Compliance (More Available Upon Request)
IEC62109-1, IEC62109-2, EN 61000-6 series , EN 62920 EMC, EN 55011 EMC, ETSI EN 301-489-1 EMC,
Certificates
ETSI EN 301 489-17 EMC, EN 61000 3-11, EN 61000 3-12, IEC61000 2-2
Grid connection standards ABNT16149/16150:2013, NRS 097-2-1, PEA, MEA
Active Safety Higher Yields Battery Ready
AFCI, Up to 30% More Energy Plug & Play, Whole-house
*1.The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage the inverter.
Active Arcing Protection with Optimizer power backup


Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

23 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 24
SUN2000-3/4/5/6/8/10KTL-M1 (High Current Version)
Technical Specification
SUN2000 SUN2000 SUN2000 SUN2000 SUN2000 SUN2000
Technical Specification
-3KTL-M1 -4KTL-M1 -5KTL-M1 -6KTL-M1 -8KTL-M1 -10KTL-M1
Efficiency
Max. efficiency 98.2% 98.3% 98.4% 98.6% 98.6% 98.6%
SMART ENERGY European weighted efficiency 96.7% 97.1% 97.5% 97.7% 98.0% 98.1%
Input (PV)
Recommended max. PV power 1 4,500 Wp 6,000 Wp 7,500 Wp 9,000 Wp 12,000 Wp 15,000 Wp
Max. input voltage 2 1,100 V
Operating voltage range 3 140–980 V
Startup voltage 200 V
CONTROLLER Rated input voltage 600 V
Max. input current per MPPT 13.5 A
Max. short-circuit current 19.5 A
Number of MPP trackers 2
Model: SUN2000-3/4/5/6/8/10KTL-M1 Max. input number per MPP tracker 1
Input (DC Battery)
(High Current Version) Compatible battery LUNA2000-5/10/15-S0, LUNA2000-7/14/21-S1
Operating voltage range 600–980 V
Max. operating current 16.7 A
Max. charge power 10,000 W
Max. discharge power 3300 W 4400 W 5500 W 6600 W 8800 W 10000 W
Output (On Grid)
Grid connection Three-phase
Rated output power 3000 W 4000 W 5000 W 6000 W 8000 W 10,000 W
Max. apparent power 3300 VA 4400 VA 5500 VA 6600 VA 8800 VA 11,000 VA4
Rated output voltage 220 V AC/380 V AC, 230 V AC/400 V AC, 3W/N+PE
Rated AC grid frequency 50 Hz/60 Hz
Max. output current 5.1 A 6.8 A 8.5 A 10.1 A 13.5 A 16.9 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3%
Output (Off Grid)
Max. apparent power 3000 VA 3300 VA 3300 VA 3300 VA 3300 VA 3300 VA
Rated output voltage 220 V/230 V
Max. output current 13.6 A 15 A 15 A 15 A 15 A 15 A
Power factor range 0.8 leading ... 0.8 lagging
Protection Feature
Input-side disconnection device Yes
Anti-islanding protection Yes
DC reverse polarity protection Yes
Insulation monitoring Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current monitoring Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Arc fault protection Yes
Ripple receiver control Yes
Battery charging from grid Yes
General Specification
Operating temperature range –25°C to +60°C (–13°F to +140°F)
Relative operating humidity 0%–100% RH
Max. operating altitude 4,000 m (13,123 ft.) (Derated above 2000 m)
Cooling Natural convection
Display LED Indicators; Integrated WLAN + FusionSolar app
Communication RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE; 4G/3G/2G via Smart Dongle-4G (Optional)
Weight (incl. mounting brackets) 17 kg (37.5 lb)
Dimensions (incl. mounting brackets) 525 mm x 470 mm x 146.5 mm (20.7 in. x 18.5 in. x 5.8 in.)
IP rating IP65
Nighttime power < 5.5 W
Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P2, SUN2000-600W-P
Standards Compliance (More Available Upon Request)
Safety EN/IEC 62109-1, EN/IEC 62109-2, IEC 62116
G98, G99, EN 50438, CEI 0-21, VDE-AR-N-4105, AS 4777, C10/11, ABNT, UTE C15-712, RD 1699, TOR D4, NRS
Grid connection standards
097-2-1, IEC61727, IEC62116, DEWA


Active Safety Higher Yields Battery Ready *1 The inverter max input PV power is 20,000 Wp when long strings are designed and connected to SUN2000-450W-P2 or SUN2000-600W-P power optimizers.
*2 The max. input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage the inverter.
AFCI Active Arcing Up to 30% More Energy Plug & Play Battery *3 Any DC input voltage beyond the operating voltage range may result in inverter malfunction.
1 2
Protection with Optimizer Port *4 C10/11: 10,000 VA

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

25 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 26
SUN2000-5/6/8/10/12K-MAP0
Technical Specification
SUN2000-5K- SUN2000-6K- SUN2000-8K- SUN2000-10K- SUN2000-12K-
Technical Specification ¹
MAP0 MAP0 MAP0 MAP0 MAP0
Efficiency
Max. efficiency 98.4% 98.6% 98.6% 98.6% 98.6%
European weighted efficiency 97.5% 97.7% 98.0% 98.1% 98.2%
SMART ENERGY Input (PV)
Recommended max. PV power 1 9000 Wp 11,000 Wp 14,600 Wp 18,000 Wp 22,000 Wp
Max. input voltage 2 1100 V
Operating voltage range 3 160–1000 V
Max. short-circuit current 160 V
CONTROLLER Startup voltage 600 V
Max. input current per MPPT 16 A
Max. short-circuit current 22 A
Number of MPP trackers 2
Max. input per MPP tracker 1
Input (DC Battery)
Model: SUN2000-5/6/8/10/12K-MAP0 Compatible battery LUNA2000-5/10/15-S0 / LUNA2000-7/14/21-S1
Operating voltage range 600–980 V
Max. operating current 20 A
Max. charging power 12,000 W
Max. discharging power 5500 W 6600 W 8800 W 11,000 W 12,000 W
Output (On Grid)
Grid connection Three-phase
Rated output power 5000 W 6000 W 8000 W 10,000 W 12,000 W
Max. apparent power 5500 VA 6600 VA 8800 VA 11,000 VA 13,200 VA
Rated output voltage 220 V AC/380 V AC, 230 V AC/400 V AC, 240 V AC/415 V AC 3W/N + PE
Rated AC grid frequency 50 Hz/60 Hz
Max. output current 18.3 A 10.0 A 13.3 A 16.7 A 20.2 A
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3%
Output (Off Grid)
Compatible backup device SmartGuard-63A-T0 (3 phase)
Rated output power 5000 W 6000 W 8000 W 10,000 W 10,000 W
Rated output voltage 220 V AC/380 V AC, 230 V AC/400 V AC, 240 V AC/415 V AC 3W/N + PE
110% overload Continuous
150% overload 5 min (3-phase) / 5 min (Single-phase) 1 min (3-phase) / 5 min (Single-phase)
200% overload 10 seconds
Automatic switchover time ≤ 20 ms (with SmartGuard-63A-T0)
Protection Feature
Asymmetric load Yes, supports 100% three-phase asymmetric load
Input-side disconnection device Yes
Anti-islanding protection Yes
DC reverse polarity protection Yes
Insulation detection Yes
DC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
Residual current detection Yes
AC overcurrent protection Yes
AC short-circuit protection Yes
AC overvoltage protection Yes
Arc fault protection Yes
Connector temperature detection Yes (PV & Battery connectors)
Ripple receiver control Yes
Battery charging from grid Yes
General Specification
Operating temperature range –25°C to +60°C (–13°F to +140°F)
Relative operating humidity 0 % - 100% RH
Max. operating altitude 4000 m
Cooling Natural convection
Noise ≤ 29 dB
Display LED Indicators; Integrated WLAN + FusionSolar APP
RS485; WLAN / Ethernet via Smart Dongle-WLAN-FE (Optional)
Communication
4G/3G/2G via Smart Dongle-4G (Optional); EMMA (Optional)
Weight (incl. mounting brackets) 21 kg
Dimensions (incl. mounting
490 mm x 460 mm x 130 mm
brackets)
IP rating IP66
Nighttime power < 5.5 W
Optimizer Compatibility
DC MBUS compatible optimizer SUN2000-450W-P2, SUN2000-600W-P
Standards Compliance (More Available Upon Request)
Safety EN/IEC62109-1, EN/IEC62109-2
Asymmetric Load Active Safety Future Ready
IEC61727, IEC62116, MEA/PEA, G99, IRR-DCC-MV/IRR-TIC, Philippine Grid Code Resolution No. 07, NRS 097-2-
Three-phase asymmetric output AFCI & RSD (with optimizer) LUNA S0 or S1 Grid connection standards 1, EN50549-1, VDE4105, UTE15-712-1/VFR 2019, UNE217002, NTS631, RD244(UNE217001), PPDS, ROGA, TOR
200% overload Connector temperature detection Whole home backup (with Erzeuger, CEI 0-21:2020-12 V1, CEI-016, C10/C11
SmartGuard) *1 The max. input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage the inverter.
*2 Any DC input voltage beyond the operating voltage range may result in inverter malfunction.


27 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 28
SUN2000-12/15/17/20/25K-MB0
Technical Specification
SUN2000-12K- SUN2000-15K- SUN2000-17K- SUN2000-20K- SUN2000-25K-
Technical Specification ¹
MB0 MB0 MB0 MB0 MB0
Efficiency
Max. efficiency 98.4% 98.4% 98.4% 98.4% 98.4%
SMART ENERGY European weighted efficiency 97.9% 98.0% 98.1% 98.1% 98.2%
DC Input
Recommended max. PV power 18,000 Wp 22,500 Wp 22,500 Wp 30,000 Wp 37,500 Wp
Max. input voltage 2 1,100 V
Max. input current per MPPT 30 A (two strings) / 20 A (single string)
Max. short-circuit current 40 A
CONTROLLER Start-up voltage 200 V
MPPT operating voltage range 3 200 V–1000 V
Full-load MPPT voltage range 370 V–800 V 410 V–800 V 440 V–800 V 480 V–800 V 530 V–800 V
Rated input voltage 600 V
Max. number of inputs 4
Number of MPP trackers 2
Model: SUN2000-12/15/17/20/25K-MB0 Smart String Energy Storage System Terminal
Compatible Smart String ESS LUNA2000-5/10/15-S0, LUNA2000-7/14/21-S1
Number of terminals 2
Max. charging power 21 kW (Single string) / 25 kW (Two strings)
Max. discharge power 13.2 kW 16.5 kW 18.7 kW 22.0 kW 25.0 kW
Max. operating current 26.25 A (per string)
Operating voltage range 600 V ~ 980 V
Output
Rated output power 12,000 W 15,000 W 17,000 W 20,000 W 25,000 W
Max. apparent power 13,200 VA 16,500 VA 18,700 VA 22,000 VA 27,500 VA
Max. active power (cosφ = 1) 13,200 W 16,500 W 18,700 W 22,000 W 27,500 W
Rated output voltage 220 V AC/380 V AC, 230 V AC/400 Vac, 240 V AC/415 V AC; 3 W/N + PE
18.2 A/380 V AC 22.8 A/380 V AC 25.8 A/380 V AC 30.4 A/380 V AC 38.0 A/380 V AC
Rated output current 17.3 A/400 V AC 21.7 A/400 V AC 24.5 A/400 V AC 28.9 A/400 V AC 36.1 A/400 V AC
16.7 A/415 V AC 20.9 A/415 V AC 23.7 A/415 V AC 27.8 A/415 V AC 34.8 A/415 V AC
20.2 A/380 V AC 25.2 A/380 V AC 28.6 A/380 V AC 33.6 A/380 V AC 42.0 A/380 V AC
Max. output current 19.1 A/400 V AC 23.9 A/400 V AC 27.1 A/400 V AC 31.9 A/400 V AC 39.9 A/400 V AC
18.5 A/415 V AC 23.1 A/415 V AC 26.1 A/415 V AC 30.8 A/415 V AC 38.5 A/415 V AC
Rated AC grid frequency 50 Hz/60 Hz
Adjustable power factor 0.8 leading ... 0.8 lagging
Max. total harmonic distortion ≤ 3%
Feature & Protection
Overvoltage category PV II/AC III
Input-side disconnection device Yes
Anti-islanding protection Yes
AC over-current protection Yes
DC reverse-polarity protection Yes
DC surge protection TYPE II
AC surge protection Yes, compatible with TYPE II protection class according to EN/IEC 61643-11
DC insulation resistance detection Yes
Residual current monitoring unit Yes
Arc fault protection Yes
General Specification
Operating temperature range -25 °C to +60 °C (-13 °F to 140 °F)
Relative humidity 0 % RH–100 % RH
Max. operating altitude 4,000 m (13,123 ft.) (Derated above 2,000 m)
Cooling Smart air cooling
Display LED indicators, Integrated WLAN + FusionSolar APP
RS485; WLAN/Ethernet via Smart Dongle-WLAN-FE (Optional)
Communication
4G/3G/2G via Smart Dongle-4G (Optional); EMMA (Optional)
Weight 21 kg
Dimensions (W x H x D) 546 mm x 460 mm x 228 mm (21.5 x 18.1 x 9.0 inch)
Protection level IP66
Nighttime power < 5.5W
Max. number of paralleled unit
3
(with Smart String ESS)
Optimizer Compatibility
Compatible optimizer SUN2000-450W-P2, SUN2000-600W-P, MERC-1100W-P, MERC-1300W-P
Standards Compliance (More Available Upon Request)
Certificates EN/IEC62109-1, EN/IEC62109-2
IEC61727, IEC62116, IEC61683, EN50530, ABNT NBR 16149/16150, MEA/PEA, G99, IRR-DCC-MV/IRR-TIC,
Philippine Grid Code Resolution No. 07, NRS 097-2-1, EN50549-1, VDE4105, UTE15-712-1/VFR 2019, UNE217002,
Grid connection standards
NTS631, RD244(UNE217001), PPDS, ROGA, TOR Erzeuger, CEI 0-21:2020-12 V1, CEI-016, C10/C11, EN50549-2,
VDE4110

Active Safety Higher Yields Battery Ready
*1 For Thailand, only SUN2000-12K-MB0 & SUN2000-15K-MB0 & SUN2000-20K-MB0 are available.
AFCI Active Arcing Up to 30% More Energy 2 Battery Terminals; *2 The maximum input voltage is the upper limit of the DC voltage. Any higher input DC voltage would probably damage the inverter.
Protection with Optimizer 1 Compatible with LUNA2000-S0 *3 Any DC input voltage beyond the operating voltage range may result in inverter malfunction.

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

29 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 30
LUNA2000-5/10/15-S0
Technical Specification
SMART STRING ENERGY LUNA2000-5-S0 LUNA2000-10-S0 LUNA2000-15-S0
STORAGE SYSTEM Technical Specification
Model: LUNA2000-5/10/15-S0

Performance
Power module LUNA2000-5KW-C0
Number of power modules 1
Battery module LUNA2000-5-E0
Battery module capacity 5 kWh
Number of battery modules 1 2 3
Battery usable capacity 1 5 kWh 10 kWh 15 kWh
Max. output power 2.5 kW 5 kW 5 kW
Peak output power 3.5 kW, 10s 7 kW, 10s 7 kW, 10s
Nominal voltage (single-phase system) 450 V
Operating voltage range (single-phase system) 350–560 V
Nominal voltage (three-phase system) 600 V
Operating voltage range (three phase system) 600–980 V
Communication
Display SOC status indicator, LED indicator
Communication RS485/CAN (only for parallel operation)
General Specification
670 mm x 150 mm x 600 mm 670 mm x 150 mm x 960 mm 670 mm x 150 mm x 1320 mm
Dimensions (W x D x H)
(26.4 in. x 5.9 in. x 23.6 in.) (26.4 in. x 5.9 in. x 37.8 in.) (26.4 in. x 5.9 in. x 60.0 in.)
Weight (Floor stand toolkit included) 63.8 kg (140.7 lb) 113.8 kg (250.9 lb) 163.8 kg (361.1 lb)
Power module dimension (W x D x H) 670 mm x 150 mm x 240 mm (26.4 in. x 5.9 in. x 9.4 in.)
Power module weight 12 kg (26.5 lb)
Battery module dimensions (W x D x H) 670 mm x 150 mm x 360 mm (26.4 in. x 5.9 in. x 14.0 in.)
Battery module weight 50 kg (110.2 lb) 2
Installation Floor stand (standard), Wall mount (optional)
Operating temperature –20°C to +55°C (–4°F to +131°F) 3
Max. operating altitude 4,000 m (13,123 ft.) (Derated above 2,000 m)
Environment Outdoor/Indoor 4
Relative humidity 5%–95% RH
Cooling Natural convection
IP rating IP 66
Noise emission 5 < 29 dB
Cell technology Lithium-iron phosphate (LiFePO4)
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/3.68/4/4.6/5/6K-LB0, SUN2000-8/10K-LC0
Compatible inverters 6 SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-12/15/17/20/25K-MB0
More Usable Energy Flexible Investment Safe & Reliable SUN2000-5/6/8/10/12K-MAP0, SUN5000-8/12K-MAP0, SUN5000-17/25K-MB0
100% Depth of Discharge and 5 kWh Modular Design, 5-layer Safety Protection Standards Compliance (More Available Upon Request)
Pack-Level Energy Optimization Scalable from 5 to 30 kWh IP66 Certificates CE, RCM, CEC, VDE2510-50, IEC62619, IEC 60730, UN38.3
Ordering and Deliverable Part
Available for ordering 7 LUNA2000-5KW-C0, LUNA2000-5-E0, LUNA2000 Wall Mounting Bracket

*1 Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25°C, at the beginning of life. If no PV modules are installed or the system has not detected
sunlight for at least 24 hours, the minimum end-of-discharge SOC is 15%.
*2 The weight of the battery modules varies with products, with a tolerance of ±3%.
*3 Refer to battery warranty letter for conditional application.
Easy Installation Quick Commissioning Perfect Compatibility *4 Outdoor installation is recommended. For indoor installation, refer to the user manual for instruction.
*5 Noise level (typical): < 29 dB(A) @1 m, 30°C, power on and run stably for 2 hours
12 kg Power Module Automatic Device Compatible to Single & Three *6 Please contact a local engineer for compatibility information.
50 kg Battery Module Discovery by the App Phase Inverters *7 The power module and battery modules of the storage system are separately ordered in the required quantity.

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

31 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 32
LUNA2000-7/14/21-S1
Technical Specification
SMART STRING ENERGY LUNA2000-7-S1 LUNA2000-14-S1 LUNA2000-21-S1
STORAGE SYSTEM Technical Specification
Model: LUNA2000-7/14/21-S1

Performance
Power module LUNA2000-10KW-C1
Number of power modules 1
Battery module LUNA2000-7-E1
Battery module capacity 6.9 kWh
Number of battery modules 1 2 3
Battery usable energy 1 6.9 kWh 13.8 kWh 20.7 kWh
Max. charging & discharging power 3.5 kW 7 kW 10.5 kW
Operating voltage range (single-phase system) 350–560 V
Operating voltage range (three phase system) 600–980 V
Communication
Display SOC status indicator, LED indicator
Communication 2 RS485/FE/CAN
General Specification
Dimensions (W x D x H) 590 mm x 255 mm x 510 mm 590 mm x 255 mm x 870 mm 590 mm x 255 mm x 1230 mm
Weight (Floor stand toolkit included) 80 kg 148 kg 216 kg
Power module dimensions (W x D x H) 590 mm x 255 mm x 150 mm
Power module weight 10 kg
Battery module dimensions (W x D x H) 590 mm x 255 mm x 360 mm
Battery module weight 3 68 kg (110.2 lb) 2
Installation Floor stand (standard), Wall mount (optional)
Operating temperature 4 –20°C to +55°C (–4°F to +131°F)
Max. operating altitude 5 4,000 m (13,123 ft.) (Derated above 2,000 m)
Environment 6 Outdoor / Indoor
Relative humidity 5%–95%
Cooling Natural convection
IP rating IP 66
Noise emission < 29 dB 7

Cell technology Lithium-iron phosphate (LiFePO4)
Scalability 8 Max.4 systems in parallel operation
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/3.68/4/4.6/5/6K-LB0, SUN2000-8/10K-LC0,
Compatible inverters 9 SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-5/6/8/10/12K-MAP0
SUN2000-12/15/17/20/-25K-MB0, SUN5000-8/12K-MAP0, SUN5000-17/25K-MB0
Standards Compliance (More Available Upon Request)
Certificates CE, RCM, CEC, VDE2510-50, IEC62619, IEC 60730, UN38.3, ISO13849, REACH, RoHS
Flexible Capacity More Usable Energy 5-layer Safety Protection Ordering and Deliverable Part
6.9 kWh per Battery Module Module+ Architecture, Built-in Energy Optimizer Cell-level, Electrical-level, Structural-level Available for ordering 10 LUNA2000-7-E1, LUNA2000-10KW-C1, Wall Mounting Bracket for LUNA2000-7/14/21-S1
Scalable from 6.9 kWh to 20.7 kWh per Group Ultra-long Service Time Active Protection, Emergency Protection
Max. 4 Groups with 82.8 kWh for an Inverter8 100% Depth of Discharge
*1 Test conditions: 100% depth of discharge (DoD), 0.2C rate charge & discharge at 25℃ , at the beginning of service life.
*2 CAN is for communication between ESSs in parallel scenarios only. The launch time of the FE communication version is to be determined. Please confirm with your local product
manager of Huawei for information about the final version.
*3 The weight of the battery modules varies with products, with a tolerance of ±3%.
*4 The output power may be affected by temperature. Please refer to the output derating curve for details.
*5 The output power may be affected by altitude. Please refer to the output derating curve for details.
*6 Outdoor installation is recommended. For indoor installation instructions, please refer to the user manual.
*7 The data is from Huawei lab, and the test condition is 1m distance and typical working voltage.
Ultimate Use Experience Easy Installation Aesthetically Pleasing Design *8 Only SUN2000-12/15/17/20/25K-MB0 supports 4 energy storage systems in parallel operation.
–20°C to +55°C Operating Temperature Cable Free Connection Between Modules Breathing Star Ring Display *9 For details on the timetable of compatibility with SUN2000-8/10K-LC0 and SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, please confirm with your local product manager of Huawei for
final version.
Max 10.5 kW Charging & Discharging Power per Group Horizontal Adjustment Design Silky Curve Design *10 The power module and battery modules of the storage system are separately ordered in the required quantity.
Super Quiet Operation Quick Commissioning Simplistic and Borderless
Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

33 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 34
SUN2000-450W-P2/SUN2000-600W-P
Technical Specification

Technical Specification SUN2000-450W-P2 SUN2000-600W-P
Input
SMART MODULE Rated input DC power 1 450 W 600 W
Absolute max. input voltage 80 V
MPPT operating voltage range 10–80 V
CONTROLLER Max. short-circuit current (Isc) 14.5 A
Max. efficiency 99.5%
Weighted efficiency 99.0%
Model: SUN2000-450W-P2/SUN2000-600W-P Overvoltage category II
Output
Max. output voltage 80 V
Max. output current 15 A
Output bypass 2 Yes
Output voltage during standby 3 0 V
Output impedance during standby 1 kΩ ± 10%
Communication
Communication protocol MBUS
Standards Compliance
Safety      IEC62109-1 (class II safety)
RoHS Yes
Fire Safety VDE-AR-E 2100-712:2018-12
General Specifications
Dimensions (W x H x D) 75 mm x 140 mm x 28 mm (3.0 in. x 5.5 in. x 1.1 in.)
Weight (including cables) 0.6 kg (1.3 lb.)
Installation kit (optional) Frame mounting bracket/T-shaped bolt 4
Input connector Staubli MC4
Input wire length 0.15 m (0.49 ft.)
Output connector Staubli MC4
Output wire length 1.3 m (4.3 ft.)
Operating temperature/humidity range –40°C to +85°C 5/0%–100%
IP rating IP68
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/3.68/4/4.6/5/6K-LB0, SUN2000-8K/10K-LC0,
SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-5/6/8/10/12K-MAP0, SUN2000-12/15/17/20/25KTL-M5,
Compatible inverters
SUN2000-12K/15K/17K/20K/25K-MB0, SUN5000-8/12K-MAP0, SUN5000-17/25K-MB0,
SUN2000-30K/36K/40K-M3


SUN2000- SUN2000- SUN2000-
6 SUN2000- SUN2000- SUN2000- SUN2000- SUN2000- SUN5000- SUN5000-
PV System Design 5~2K 12~25KTL 30~40K
2~6KTL-L1 3~6K-LB0 8K/10K-LC0 3~10KTL-M1 12~25K-MB0 8/12K-MAP0 17/25K-MB0
-MAP0 -M5 -M3

Min. string length
4 4 4 6 6 6 6 6 6 6
(power optimizers)
Max. string length
25 25 25 35 35 35 35 35 35 25
(power optimizers)

Max. DC power per string 6,000 W 6,000 W 6,000 W 10,000 W 12,000 W 12,000 W 12,000 W 12,000 W 12,000 W 12,000 W

*1 The maximum power of PV module at STC shall NOT exceed the “Rated Input DC Power” of the power optimizer. PV modules with up to +5% power tolerance are allowed.
*2 Any power optimizer, which is connected to an operating inverter in a PV string, will be bypassed when it fails.
Higher Yields Active Safety Flexible Design Smart O&M *3 Once the power optimizer stops working, its output voltage is reduced to 0 V.
*4 It is for PV module frame/extruded aluminum profile racking system installation.
Module-level Optimization Module-level Rapid Easier Module Layout Module-level
*5 When the operating temperature of the SUN2000-450W-P2/600W-P reaches 70 °C to 85 °C, it may shut down due to over-temperature protection and report an over-temperature
Increases System Energy Shutdown for worry-free and 30% Higher Installed Visibility and Refined alarm. After the temperature decreases, it can automatically resume working without causing any damage.
Yield by 5% to 30% firefighting Capacity on Average Management *6 SUN2000-450W-P2/600W-P and MERC-1100/1300W-P can NOT be used in mixture under the same Smart Energy/PV Controller.

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

35 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 36
MERC-1100/1300W-P
Technical Specification

Technical Specification MERC-1100W-P MERC-1300W-P
Input
SMART MODULE Rated input DC power 1 1100 W 1300 W
Absolute max. input voltage 125 V
MPPT operating voltage range 12.5–105 V
Max. short-circuit current (Isc) 20 A
CONTROLLER Max. efficiency 99.5%
Weighted efficiency 99.0%
Overvoltage category II
Model: MERC-1100/1300W-P Output
Max. output voltage 80 V
Max. output current 22 A
Output bypass 2 Yes
Safety output voltage 3 1 V
Standards Compliance
Safety    IEC62109-1 (class II safety)
RoHS Yes
General Specification
Dimensions (W X H X D) 149 mm x 104 mm x 48.8 mm (5.9 in. x 4.1 in. x 1.9 in.)
Weight (including wires) 1.0 kg (2.2 lb.)
Installation kit (optional) PV Module Frame Plate/T-shaped Bolt 4
Input connector Staubli MC4
Input wire length 0.1 m (+/-) (short-input-cable version) 5
Output connector Staubli MC4
Output wire length 0.1 m (+), 5.1 m (-) (short-input-cable version) 5
Operating temperature –40°C to +85°C 6
Relative humidity 0%–100%
IP rating IP68
SUN2000-12-25K-MB0, SUN2000-12-25KTL-M5, SUN2000-30-40KTL-M3,
Compatible inverters
SUN2000-50KTL-M3, SUN5000-150K-MG0


7/8/9 SUN2000- SUN2000- SUN2000- SUN2000-
PV System Design SUN5000-150K-MG0
12~25K-MB0 12~25KTL-M5 30~40KTL-M3 50KTL-M3

Min. string length (power optimizers) 8 8 8 8 12

Max. string length (power optimizers) 25 25 25 20 20

Max. DC power per string 20,000 W 20,000 W 20,000 W 20,000 W 20,000 W


Short-input-cable Version


*1 The maximum power of PV module at STC shall NOT exceed the “Rated input DC power” of MERC-1100/1300W-P. PV Modules with up to ±10% power tolerance are allowed.
*2 Any power optimizer, which is connected to an operating inverter in a PV string, will be bypassed when it fails.
*3 When the MERC-1100/1300W-P is disconnected from inverter or when the inverter is off, its output voltage will become 1 V.
*4 It is for PV module frame/extruded aluminum profile racking system installation.
*5 Pay attention to the PV module wire length. To match PV modules with a split junction box and short output wire, the long-input-cable version (input wire: 1.3 m (+/-); output
wire: 0.1m (+)/2.9m (-)) of MERC-1100/1300W-P is available upon request.
*6 When the operating temperature of the MERC-1100/1300W-P reaches 70 °C to 85 °C, it may shut down due to over-temperature protection and report an over-temperature alarm.
Higher Yields Flexible Design Active Safety Smart O&M After the temperature decreases, it can automatically resume working without causing any damage.
*7 Each PV module under the same inverter must be equipped with a MERC-1100/1300W-P.
Module-level Optimization Long String Design to Firefighting and O&M Pinpointing Open-
*8 SUN2000-450W-P2/600W-P and MERC-1100/1300W-P can NOT be used in mixture under the same Smart Energy/PV Controller.
Increases System Energy Reduce Bos Safety with Module- Circuit Fault for Quick *9 It is recommended that strings under the same inverter have an equal capacity. If this is not feasible, the capacity difference between strings under the same inverter must not
Yield by 5% to 30% level Rapid Shutdown Troubleshooting exceed 2 kW. Otherwise, the energy yield will be reduced.

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

37 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 38
SCharger-7KS-S0/SCharger-22KT-S0
Technical Specifications

Technical Specification SCharger-7KS-S0 SCharger-22KT-S0
SMART CHARGER Inputs and Outputs
Charge power (configurable) 1.4 kW to 7.4 kW 1.4 kW 1 to 22 kW
Model: SCharger-7KS-S0/SCharger-22KT-S0 Nominal voltage 230 V ± 20% (1-phase) 400 V ± 20% (3-phase)
Nominal current (configurable) 6–32 A (1-phase) 6–32 A (3-phase or 1-phase)
Nominal frequency 50 Hz/60 Hz ± 1 Hz
Vehicle connection Type 2 socket
Cable cross-sectional area Up to 10 mm2
Network types TN, TT, IT TN, TT
User Interface & Communications
Protocol Modbus TCP, OCPP 1.6
Communication Wi-Fi/Ethernet
Charger status information WRGB LED and app
Authentication RFID (ISO-14443-A), app, Bluetooth
Remote control & monitoring App
Normal Charge
Scheduled Charge
Working mode
PV Power Preferred
Next Trip 2
Protection
Cable protection Cable E-Lock via app
Residual current protection (RCD) Type A (30 mA) + DC 6 mA integrated
Fire class UL94
Overcurrent protection IEC 61851-1
Over-temperature protection Yes
Surge protection CAT II
General Specification

–35°C to +50°C @ 16A
Operating temperature range –35°C to +45°C
–35°C to +40°C @ 32A

Application environment Outdoor/Indoor
Storage temperature –40°C to +70°C
Relative humidity 5%–95% RH
Altitude ≤ 2000 m (Derated between 2000–4000 m)
Dimensions (H x W x D) 335 mm x 180 mm x 145 mm
Single-Phase Three-Phase
Weight 3 kg 3.1 kg
7.4 kW/32 A 22 kW/32 A Installation mode Wall-mounted
SCharger-7KS-S0 SCharger-22KT-S0 IP rating IP54
Impact protection level IK10
Standby self-consumption < 6 W
*Available in specific regions only Standards Compliance (More Available Upon Request)
Safety & health EN IEC 61851-1 2019, EN 62311 2008, EN IEC 62311 2020, EN 50665 2017, EN 50364 2018
EN IEC 61851-21-2 2021, EN 301 489-1 V2.2.3 2019, EN 301 489-3 V2.1.1 2019, EN 301 489-17
EMC
V3.2.4 2020
Radio ETSI EN 300 328 V2.2.2, ETSI EN300 330 V2.1.1
RoHS EN IEC 63000:2018
Others
Accessories RFID Card * 2
PV Power Dynamic Charging Power 3 Ways of 3-Step Installation
Power Your Car with Solar Automatic Detection and Authentication Fast Installation in 15
*1 1.4 kW for 1-phase charging and 4. 2 kW for 3-phase charging
Make EV Even Greener Adjustment Authentication through Minutes
*2 Next Trip mode is only available with EMMA-A02
No Worry about Overload Bluetooth, RFID and APP Wiring-free Maintenance

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

39 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 40
SmartGuard-63A-T0/AUT0
Technical Specifications

Technical Specification SmartGuard-63A-T0 SmartGuard-63A-AUT0

General Data
SMARTGUARD Dimensions (W x H x D) 600 mm × 170 mm × 490 mm
Weight (not including mounting plate ) 17 kg
Performance
Model: SmartGuard-63A-T0/AUT0 AC Voltage (Nominal) 380/400/415V, 220/230/240V, L1/L2/L3/N+PE
Max. current (from/to Grid) 63 A
Max. current (from/to Inverter) 60 A
Max. current (to Backup Load) 63 A
Max. current(to Non-BackupLoad) ¹ 63 A
Low-Voltage ride-through Supported
Switchover time ≤ 20ms (MAP0), ≤ 100ms (M1/MB0) ²
Bypass operation mode Manual
DG mode Remote control
Interface
Power output 9.5–13.2V @ 100mA, ≤ 3m
LAN 10/100Mbps, ≤ 100m
WAN 10/100Mbps, ≤ 100m
WLAN AP Mode, 802.11b/g/n (2.412GHz–2.484GHz)
RS485 9600/19200/115200bps,× 2, ≤ 50m
Digital input ×2, ≤ 20m; Active port 3
Digital output ×2, ≤ 20m
DG Do Port Passive Port, 1-100mA ≤24V
ATS Need prepare the ATS, which supports automatic control and automatic switch-in and reset.
Measurement Range
Current range ≤ 63 A
Energy accuracy ± 1%
Device Management
Smart energy controllers up to 3
Smart chargers up to 2
Heat pump up to 14
Shelly device up to 20
Environment
Cooling Natural Convection
Relative humidity range 5%-95% RH (non condensing)
Max. operating altitude 4000m (derated over 2000m)
Degree of protection IP55
Operating temperature range -25°C–50°C 5
Compatible Device
Max. 3 inverters supported in parallel connection (MAP0)
Smart energy controller
Max. 1 inverter supported (M1/MB0)
Smart charger SCharger–7KS/22KT–S0
Heat pump SG-ready
Shelly device Shelly Plus Plug S, Shelly Plus 2PM, Shelly Pro 2PM 6

*1 The sum of the output current of the backup port and the non backup port could not be more than 63A
*2 Seamless switching is disabled by default and needs to be manually enabled.
*3 The position feedback signal must be a passive port that works with an external circuit and can work at a current of less than or equal to 0.7 mA@12 V.
The low impedance of the circuit for the position feedback signal is less than or equal to 100 ohms.
Simple Seamless Reliable Intelligent *4 1 SG ready Heat Pump can be connected directly. Others can be connected via shelly devices.
*5 On grid Mode: 25–30°C, no derating; 30–50°C, linear derating from 63A to 43A;
Three-phase whole home ≤20ms Ultra-fast switchover to Provide bypass mode Ready for DG, intelligent loads Off grid Mode: 25–40°C, no derating; 40–50°C, linear derating from 60A to 50A
backup supported power backup mode when a fault occurs management with EMMA *6 The supported firmware version of shelly devices can be found in user manual.

Disclaimer: the preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.


41 FusionSolar Residential Smart PV Solution VersionVersion No.: No.: 04-202311 01-202411 FusionSolar Residential Smart PV Solution 42
SmartGuard-63A-S0
Technical Specifications

Technical Specification SmartGuard-63A-S0
SMARTGUARD General Data
Dimensions (W x H x D) 485 mm × 150 mm × 355 mm
Weight ≤14 kg

Model: SmartGuard-63A-S0 Performance

AC Voltage (nominal) 220/230/240 V L/N+PE
Max. current (from Grid) 63 A
Max. current (from Inverter) 60 A
Max. current (to backed-up load) 63 A
Max. current
63 A
(to non-backed-up load) 2
Self consumption 10 W
Low-voltage ride-through Supported
Switchover time ≤ 20 ms (in Seamless Mode)
Bypass operation mode Manual

Interface

Power output 9.5–13.2V @ 100mA, ≤ 3m
LAN 10/100 Mbps, ≤ 100 m
WAN 10/100 Mbps, ≤ 100m
WLAN AP Mode, 802.11b/g/n (2.412 GHz–2.484 GHz)
RS485 9600/19200/115200 bps,× 2, ≤ 50m
Digital input ×2, ≤ 20 m
Digital output ×2, ≤ 20 m

Measurement Range

Current range ≤ 63 A
Voltage range 1P (L-N): 85–299 V AC
Energy accuracy ± 1%

Device Management

Smart energy controllers up to 1
Smart chargers up to 2
Heat pump up to 13
Shelly device up to 20

Environment

Noise emission ≤ 29 dBA
Cooling Natural Convection
Relative humidity range 5%-95% RH (non condensing)
Max. operating altitude 4000m (derated over 2000m)
IP rating IP55
Operating temperature range -25°C–50°C 4

Compatible Device

Smart energy controller SUN2000-2-6KTL-L1, SUN2000-3/3.68/4/4.6/5/6K-LB0, SUN2000-8-10K-LC0
Smart charger SCharger-7KS-S0
Heat pump SG-ready
Shelly device Shelly Plus Plug S, Shelly Plus 2PM, Shelly Pro 2PM 5
1
Simple Seamless Reliable Intelligent *1 The intelligent energy scheduling feature is available for a 2-year free trial. After the trial, it will be available at no more than €99 per site per year.
Whole home backup, ≤ 20 ms ultra-fast switchover to Provide bypass mode Intelligent load control with *2 The sum of the output current of the backup port and the non-backup port could not be more than 63A
no need of additional power backup mode when a fault occurs built-in EMMA *3 1 SG-ready Heat Pump can be connected directly. Others can be connected via shelly devices
*4 On-grid Mode: 25-30 °C, no derating; 30-40 °C, linear derating from 63A to 50A; 40-50 °C, linear derating from 50A to 40A
switchboard Off-grid Mode: 25-40 °C, no derating; 40-50 °C, linear derating from 54.5A to 50A
*5 The supported firmware version of shelly devices can be found in user manual

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

43 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 44
EMMA
Technical Specifications

Technical Specification EMMA-A02

General Data
ENERGY MANAGEMENT Dimension(W × H × D) 108 mm × 100 mm × 65 mm
Mounting type DIN35 Rail
Height requirement of cabinet ≥ 47.5 mm
ASSISTANT Weight 0.5 kg
Power Supply
AC Voltage 1P2W: 100 ~ 240V, 50 / 60Hz 3P3W: 346 ~ 415V, 50 / 60Hz 3P4W: 346 ~ 415V, 50 / 60Hz
Typical power consumption 4 W
Model: EMMA-A02 Interface
Power output 9.5 ~ 13.2V @ 100mA, ≤ 3m
LAN 10 / 100Mbps,≤ 100m
WAN 10 / 100Mbps,≤ 100m
WLAN AP + STA, 802.11b/g/n (2.412GHz ~ 2.484GHz)
RS485 9600 / 19200 / 115200bps,× 2, ≤ 50m
Digital input × 2, ≤ 20 m
Digital output × 2, ≤ 20 m
Interaction
LED LED Indicator × 3 RUN, ALM, COM
Button RST
APP Communication by WLAN for Commissioning
Measurement Range
Current range Direct connection: ≤ 63 A, external CT¹ : > 63 A
Voltage range 1P (L-N): 85 ~ 299 Vac; 3P (L L): 148 ~520 Vac
Energy accuracy ±1%
Device Management
Smart energy controllers up to 3
Smart chargers up to 2
Heat pump up to 1²
Shelly device up to 20
Environment
Operating temperature range -25 °C~ +60 °C
Storage temperature range -40 °C~ +85 °C
Relative humidity range 5% ~ 95% RH (non condensing)
Max. operating altitude 4000m (derating over 2000m)
Degree of protection IP2X
Compatible Device
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/3.68/4/4.6/5/6K-LB0, SUN2000-8/10K-LC0,
Smart energy controller SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-12/15/17/20/25KTL-M5, SUN2000-5/6/8/10/12K-MAP0,
SUN2000-12/15/17/20/25K-MB0, SUN5000-8/12K-MAP0, SUN5000-17/25K-MB0
Smart charger SCharger-7KS/22KT-S0
Heat pump SG-ready
Shelly device Shelly Plus Plug S, Shelly Plus 2PM, Shelly Pro 2PM 3
SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/3.68/4/4.6/5/6K-LB0, SUN2000-8/10K-LC0,
SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-12/15/17/20/25KTL-M5, SUN2000-12/15/17/20/25K-MB0,
Smart Scheduling 4
SUN2000-5/6/8/10/12K-MAP0, SUN5000-8/12K-MAP0,
SUN5000-17/25K-MB0+ LUNA2000-5/10/15-S0 / LUNA2000-7/14/21-S1
Automatically connect to Nord Pool electricity market and obtain day-ahead dynamic tariff.
Dynamic tariff
Unified management More intelligent More economical Open to 3rd parties (Available in Sweden, Denmark, Finland, Norway, Lithuania, Estonia, Latvia, and the Netherlands.)
One-stop management of Peak shaving, PV preference, feed- Automatically connect to Nord Pool, Supports Modbus-TCP and third-
inverters, ESS, optimizers, in power limitation, and automatic supporting peak-valley price arbitrage party VPP integration, enabling FCR-D *1. The secondary current of an external CT connected shall be 50 mA, and the cable length can be up to 30 m.
*2. A heat pump can be directly connected to EMMA-A02. More appliances can be connected through a Shelly device.
chargers and appliances start/stop of diesel generators. and zero-power feed-in during frequency modulation.
*3. For the Shelly device firmware version supported, please refer to the user manual.
negative price periods. *4. The smart scheduling function of the EMMA is offered free of charge for two years from the trial start date. After this period, we reserve the right to charge for this service.

Disclaimer: the preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

45 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 46
Smart Dongle-WLAN-FE
SMART DONGLE-WLAN-FE Technical Specifications
Technical Specification SDongleA-05(AP+STA)

General Specification

Max. devices supported 10

Max. inverters supported 10

Connection interface USB

Ethernet interface 10/100M Ethernet

Installation Plug-and-play

Indicator LED Indicator

Dimensions (W x H x D) 146 mm x 48 mm x 33 mm (5.1 in. x 1.9 in. x 1.3 in.)

Weight 90 g (0.2 lb.)

IP rating IP65

Power (typical) 2.5 W

Working mode AP + STA

Security protocol: WPA/WPA2
Security
Encryption: TKIP/CCMP/AES

Radio Specification

Supported standards & frequencies 802.11b/g/n (2.412–2.484 GHz)

Environment

Operating temperature range –30°C to +65°C (–22°F to +149°F)

Relative humidity range 5%–95% RH

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Max. operating altitude 4,000 m (13,123 ft.)

Standards Compliance (More Available Upon Request)

Certificate SRRC, CE, RCM

Inverter Compatibility

SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/3.68/4/4.6/5/6K-LB0, SUN2000-8/10K-LC0,
SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-12/15/17/20/25KTL-M5,
Inverter model
SUN2000-12/15/17/20/25K-MB0, SUN2000-5/6/8/10/12K-MAP0,
SUN5000-8/12K-MAP0, SUN5000-17/25K-MB0


Smart Simple Reliable
WLAN & Fast Ethernet (FE) Plug-and-play, with a IP65 Protection 1: 3rd-party management system shall support the communication protocol used on Huawei Smart Dongle.
Communication, Support 3rd- Maximum of 10 Devices
Party Monitoring System 1 Connected

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

47 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 48
Smart Dongle-4G
SMART DONGLE-4G Technical Specifications
Technical Specification SDongleB-06-EU SDongleB-06-AU SDongleB-06-NH

General Specification

Max. devices supported 10

Max. inverters supported 10

Connection interface USB

Installation Plug-and-play

Indicator LED indicator

Dimensions (W x H x D) 162 mm x 48 mm x 28 mm

IP rating IP65

Power (typical) 3.5 W

Wireless Parameter

SIM card type Mini-SIM (15 mm x 25 mm)

LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28
LTE-FDD: B1/B3/B7/B8/B20/B28 LTE-FDD: B1/B3/B8/B18/B19/B26
Supported standards & LTE-TDD: B40
LTE-TDD: B38/B40/B41 LTE-TDD: B41
frequencies 4 WCDMA: B1/B2/B5/B8
GSM: 850/900/1800/1900 MHz WCDMA: B1/B6/B8/B19
GSM: 850/900/1800/1900 MHz

Wi-Fi operation mode AP

Supported standards &
802.11b/g/n (2.412–2.484 GHz)
frequencies

Environment

Operating temperature range –30°C to +65°C (–22°F to +149°F)

Relative humidity range 5%–95% RH

Storage temperature range –40°C to +70°C (–40°F to +158°F)

Max. operating altitude 4,000 m (13,123 ft.)

Standards Compliance (More Available Upon Request)

Certificate CE RCM TELEC

Inverter Compatibility


SUN2000-2/3/3.68/4/4.6/5/6KTL-L1, SUN2000-3/3.68/4/4.6/5/6K-LB, SUN2000-8/10K-LC0,
SUN2000-3/4/5/6/8/10KTL-M1, SUN2000-12/15/17/20/25KTL-M5, SUN2000-12/15/17/20/25K-MB0,
Inverter model
SUN2000-5/6/8/10/12K-MAP0, SUN5000-8/12K-MAP0, SUN5000-17/25K-MB0,
SUN2000-4.95KTL-JPL1, SUN2000-4.95KTL-NHL2, SUN2000-4.95KTL-LB0-NH


1: To ensure stable data transmission, Huawei recommends that a 4G Dongle be installed in areas with stable mobile signal (2G signal ≥4 bars, 3G/4G signal ≥3 bars).
2: 3rd-party management system shall support the communication protocol used on Huawei Smart Dongle.
Smart Simple Reliable
1 3: When all inverters support WLAN hotspot, hotspot of Dongle will be disabled by default.
4G Communication Plug-and-play WLAN-AP IP65 4: For recommended carriers list and details on supported frequencies, please contact local distributors.
Support for 3rd-party 2 Local Deployment 3 Auto Reconnection
Monitoring System

Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

49 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 50
SmartPS-100A-S0
SMART POWER SENSOR Technical Specifications

SmartPS-100A-S0
Model: SmartPS-100A-S0 Technical Specification
DDSU666-H YDS70-C16 DDSU1079-CT DDSU71

General Specification

Dimensions (H x W x D) 100mm x 36mm x 65.5mm 101mm x 36mm x 66mm 99mm × 36mm × 66 mm 99mm × 36mm × 66 mm

Mounting type DIN35 Rail

Weight (including cables) 0.2kg 0.133kg 0.15kg 0.196kg

Power Supply

DDSU666-H YDS70-C16 DDSU1079-CT DDSU71 Power grid type 1P2W

Input voltage (phase voltage) 230V

Power consumption <1.5W

Measurement Range

Line voltage /

Phase voltage 176VAC–288VAC

Current 0.5–100A

Measurement Accuracy

Current/Voltage ±0.5%

Power/Energy ±1%

Frequency ±0.01 Hz

Communication

Interface RS485

Baud rate 4800/9600(Default)/19200/115200

Communication protocol Modbus-RTU

Environment

Operating temperature range –25°C to +60°C –35°C to +70°C –25°C to +60°C –25°C to +60°C

Storage temperature range –35°C to +70°C –40°C to +85°C –35°C to +70°C –40°C to +85°C

Operating humidity 5% RH–95% RH (non-condensing)

Others

RS485 Cable (10 m / 33 ft.)
Accessories
1 CT 100 A/40 mA


Accurate Simple & Easy Energy Efficient
Class Ⅰ Measurement LCD Display, Easy to Set Overall Power
Accuracy and Check Consumption ≤ 1.5 W


Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

51 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 52
SmartPS-250A-T0
SMART POWER SENSOR Technical Specifications
SmartPS-250A-T0
Technical Specification
Model: SmartPS-250A-T0 DTSU666-H 250A/50mA YDS60-C24 DTSU71 DHSU1079-CT

General Specification

Dimensions (H x W x D) 100mm x 72mm x 65.5mm 101mm x 72mm x 66mm 100mm × 72mm × 66mm 99mm × 72mm × 66mm

Mounting type DIN35 Rail
DTSU666-H 250A/50mA YDS60-C24
Weight (including cables) 0.3kg 0.285kg 0.248kg 0.26kg

Power Supply

Power grid type 3P3W/3P4W

Input voltage (phase voltage) 230 V AC/400 V AC

Power consumption <1.5W

Measurement Range

Line voltage 304V–500V

Phase voltage 176 V AC–288 V AC

Current 0–250A

Measurement Accuracy

Current/Voltage ±0.5%

DTSU71 DHSU1079-CT Power/Energy ±1%

Frequency ±0.01 Hz

Communication

Interface RS485

Baud rate 4800/9600(Default)/19200/115200

Communication protocol Modbus-RTU

Environment

Operating temperature range –25°C to +60°C –25°C to +60°C –25°C to +60°C –25°C to +60°C

Storage temperature range –40°C to +85°C –40°C to +85°C –35°C to +70°C –40°C to +85°C

Operating humidity 5% RH–95% RH (non-condensing)

Others

RS485 Cable (10 m / 33 ft.)
Accessories
3 CT 250 A/50 mA


Accurate Simple & Easy Energy Efficient
Class Ⅰ Measurement LCD Display, Easy to Set Overall Power
Accuracy and Check Consumption ≤ 1.5 W


Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

53 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 54
Smart Power Sensor
SMART POWER SENSOR Technical Specifications
Technical Specification DTSU666-H

General Specification

Model: DTSU666-H 100A 100 mm x 72 mm x 65.5 mm
Dimensions (H x W x D)
(3.9 in. x 2.8 in. x 2.6 in.)

Mounting type DIN35 Rail

Weight (including cables) 1.5 kg (3.3 lb)

Power Supply

Power grid type 3P3W/3P4W

Input voltage (phase voltage) 176 V AC–288 V AC

Power consumption ≤ 1 W

Measurement Range

Line voltage 304 V AC–499 V AC

Phase voltage 176 V AC–288 V AC

Current 0–100 A

Measurement Accuracy

Current/Voltage ±0.5%

Power/Energy ±1%

Frequency ±0.01 Hz

Communication

Interface RS485

Baud rate 9,600 bps

Communication protocol Modbus-RTU

Environment

Operating temperature range –25°C to +60°C

Storage temperature range –40°C to +70°C

Operating humidity 5% RH–95% RH (non-condensing)

Others

RS485 Cable (10 m / 33 ft.)

3 CT 100 A/40 mA
(5 m/16.4 ft.)
Accessories


Accurate Simple & Easy Energy Efficient
Class Ⅰ Measurement LCD Display, Easy to Set Overall Power
Accuracy and Check Consumption ≤ 1.5 W


Disclaimer: The preceding values are measured by an internal laboratory of Huawei in a specific environment. The actual values may vary with products, software versions, usage
conditions, and environmental factors.

55 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 56
FusionSolar Smart PV Management System
FUSIONSOLAR SMART PV
Category Function Web App

PV Plants List
Homepage
MANAGEMENT SYSTEM Add Plant
Plant Report

Report Management Inverter Report

Battery Report

Device Details

Device Management Remote Parameter Setting

Remote Optimizer Search

Real-time Status

Alarm Management
Intelligent O&M
Task Management

Smart IV-Curve Diagnose

KPI Dashboard KPI Dashboard

Energy Flow

Energy Management
Homepage of Single Plant
Plant Layout

Kiosk Mode

Plant Management
System Setting
Company Management

Demo Demo Site


Better Experience Energy Visualization Smart O&M

One app for All Products KPI Dashboard and Centralized Site, Personnel, and Status Management on
Auto-Discovery of Local Management of Multiple Plants One Screen
Components Module-level Monitoring
Modular Auto-mapping Within 5S Report Subscription and Real-time
Alarm Push


57 FusionSolar Residential Smart PV Solution Version No.: 01-202411 FusionSolar Residential Smart PV Solution 58
SERVICE


59 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 60
CUSTOMER SERVICE

FusionSolar global service centers cover more than 170 countries, supporting 1/3 of the world's
population

Warrant service
Your energy system guardian
If product quality defects occur under warranty,
Huawei would provide the following services:

Canada 24/7 timely response
Remote troubleshooting
Online technical support
Romania Software support service
Hungary
China Hardware support service (advance spare parts replacement within 2BD)

India
For longer-lasting warranty services
Mexico Egypt
Flexibly select the services you need based on your actual requirements

Remote technical support
Spare parts support
Malaysia
Brazil


Global Technical Support Center
Training Center
Global Spare Parts Operations Center

Process and Method Maintenance Smart tools-FusionSolar

Issue to Resolution (ITR) process: The "technology Monitor your energy system anytime anywhere
+ management escalation" mechanism ensures the AI-based customer support robot for your request
involvement of experts and mid- and high-level All service accessible on the App
executives in the process.

16+ 2000+ 24/7 Organization and Personnel
Languages Professional Technical Support
Engineers The three-level support system provides reliable
technical support for global customers.


61 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 62
FUSIONSOLAR PARTNER
Please click the link to join us: https://community.solar.huawei.com

Official Website Community Documents Center
Provide solution, products, service, Knowledge learning, certification, Professional materials for online view, download and sharing.
and news related information. communication, and rewards center.


Have more questions? Contact us and get support


Online Service Installer Forums

The online Digital Power Customer Service is You also can post your questions on the
available now. You can find it in the floating online forum to discuss with other installers.
window on the website or FusionSolar app, The technical experts also would respond to
and get help anytime, anywhere the questions


63 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 64
CASE
STUDY


65 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 66
CASES CASES

PV+ESS Scenario PV+ESS Scenario


Residential PV systems in System Configuration Residential PV system in System Configuration

Gnesta, Sweden SUN2000-450W-P2 LUNA2000-5/10/15-S0 Xanten, Germany SUN2000-5KTL-M1
Capacity: 10 MWp SUN2000-600W-P SmartGuard-63A-T0 Capacity: 11 kWp SUN2000-6KTL-M1
SUN2000-10KTL-M1 EMMA-A02 Scan the code LUNA2000-10-S0 Scan the code
SCharger-22KT-S0 to learn more to learn more

PV+ESS Scenario PV+ESS Scenario


Residential PV System in System Configuration Residential PV system in System Configuration
Milan, Italy SUN2000-450W-P2 SCharger-22KT-S0 Ho Chi Minh, Vietnam SUN2000-5KTL-L1
Capacity: 20 kWp SUN2000-10K-MAP0 SmartGuard-63A-T0 Capacity: 5 kWp LUNA2000-5-S0
LUNA2000-14-S1 EMMA-A02 Scan the code SUN2000-450W-P Scan the code
to learn more to learn more


67 FusionSolar Residential Smart PV Solution FusionSolar Residential Smart PV Solution 68