No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Knowledge Base

FAQ-How to Configure NAT Server

Publication Date:  2012-07-27  |   Views:  3  |   Downloads:  0  |   Author:  Liang Yizhi  |   Document ID:  EKB0000125799

Contents

Issue Description

How to Configure NAT Server?

 

Alarm Information

No

Handling Process

The configuration of egress is as follows: 
interface Ethernet0   
duplex full
ip address 211.××.72.×× 255.255.255.192   
nat outbound 1 interface
nat server global 211.×××.72.×× any inside 100.200.×××.2 any ip  interface Ethernet1
ip address 100.200.×××.1 255.255.255.0 
At this time, the internal server 100.200.×××.2 uses the global address 211.×××.72.×× to access public network,not the egress interface address, although the command nat outbound 1 interface is configured, and the gateway of internal server is 100.200.×××.1. 

When using NAT for translation of internal server, the internal server uses the IP of specified public network to access outside, no matter if the egress interface NAT specifies interface address or NAT address pool. 

Root Cause

No

Suggestions

No