No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Knowledge Base

L2TP Connection Fails to Set Up because of False Configurations of IP POOL

Publication Date:  2012-07-27  |   Views:  94  |   Downloads:  0  |   Author:  Luo Hongbo  |   Document ID:  EKB0000131890

Contents

Issue Description

Topology: AR28-11(LNS)--MA5200(LAC). AR28-11 is at VRP3.4-0015.
Symptom: AR28-11 fails to set up L2TP connection with MA5200.

Alarm Information

No

Handling Process

1.Configure undo ip pool command in system domain. 
2. Add IP POOL in system view.
After these configurations, L2TP tunnel set up normally. 

Root Cause

AR28-11 acts as LNS of L2TP, and no authentication is configured in virtual template; IP POOL is configured in the default system  domain, failing the L2TP connection. 

Suggestions

For routers at VRP3.4-0015, the attentions should be paid to the IP POOL configuration of L2TP: at LNS side, if virtual template is not configured with authentication, IP POOL must be configured in system view; if the virtual template is configured with authentication, IP POOL must be configured in the relevant domain.