Q: NE40 is not configured with the link-aggregation command for L2 ports at the version of Vrp3.10-23XX, so how to configure the ports of L2 LPUs for binding?
A: For NE40 at Vrp3.10-23XX, the following is to configure L2 LPU with link binding of ports:
1. Create one eth-trunk.
2. In eth-trunk interface view, use portswitch command to change the eth-trunk to L2 attribute.
3. In the actual physical port view, configure the attribute of eth-trunk, and the relevant vlan.
4. Finally, configure the vlanif interface with IP address; for the specifications of eth-trunk, see the Operation Manual.