Client enables OSPF on the whole network and hopes to enable OSPF on some interface. It prompts the following indication after entering the interface:
[ne80-Eternet 3/0/0]undo ospf ?
authentication-mode Authentication type
cost Interface cost
dr-priority OSPF interface priority
mtu-enable Add the MTU value in DD packets
network-type OSPF network type
trans-delay LSA Transmission delay
There is no CR during the display of undo ospf command. When the client enters and OSPF interrupts.
When using undo ospf command under the interface, add related parameter.
The interface does not support undo ospf, but it can be executed. It is equal that OSPF is deleted under system-view and OSPF route of the device is droped.